Currently have a zone running on a T2000. Set up with ip-shared. Network info of the card shown below
dladm show-dev e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 link: down speed: 0 Mbps duplex: half e1000g2 link: down speed: 0 Mbps duplex: half e1000g3 link: down speed: 0 Mbps duplex: half Doing a connectivity test with a SAP based java application using a particular port to connect to the zone. The test has been failing until I did some analysis using snoop on the NIC. Let me explain. If a start a snoop -d on the physical server (global ) and wait approximately until 300 pkts have been sniffed and then try the connectivity test it works. However if I start the connectivity test near the very beginning of the snoop - say 50 -100 pkts the connectivity test fails. Is there some sort of wakeup call going on between the NIC on the physical server and the virtual NIC on the zone. Any theories would be appreciated. -- This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list networking-discuss@opensolaris.org
