Joel Goguen wrote: > I built NM 0.7 from SVN (current as of this morning) and when I try to > connect to a WPA network, I get these messages. Unfortunately, I'm not > certain where to even begin looking to debug this, but hopefully some > info about the network itself is a start. The SSID contains only > alphanumeric characters, but the passphrase contains non-alphanumeric > characters, including # and !. It's WPA/TKIP. The same thing also > happens on a WPA-Enterprise network using TTLS/PAP. In this case, both > the SSID and passphrase contain non-alphanumeric characters, including ! > and @. I'm running Ubuntu 7.10 and the driver is madwifi 0.9.3. Both > these networks worked perfectly using NM 0.6.5. > > Any pointers on where to look to help debug this or suggestions to get > this working would be greatly appreciated. > > [EMAIL PROTECTED]:~/Code/network-manager-applet]$ sudo > /usr/sbin/NetworkManager > --pid-file=/var/run/NetworkManager/NetworkManager.pid --no-daemon > NetworkManager: <info> starting... > NetworkManager: <info> eth0: Device is fully-supported using driver 'sky2'. > NetworkManager: <info> (eth0): exporting device as > /org/freedesktop/Hal/devices/net_00_17_f2_2b_c6_20 > NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. > NetworkManager: <info> Bringing up device eth0 > NetworkManager: <info> Deactivating device eth0. > NetworkManager: <info> ath0: Device is fully-supported using driver > 'ath_pci'. > NetworkManager: <info> (ath0): exporting device as > /org/freedesktop/Hal/devices/net_00_16_cb_bc_a6_4b > NetworkManager: <info> Now managing wireless (802.11) device 'ath0'. > NetworkManager: <info> Bringing up device ath0 > NetworkManager: <info> Deactivating device ath0. > NetworkManager: <info> (eth0) supplicant interface is now in state 2 > (from 1). > NetworkManager: <info> (ath0) supplicant interface is now in state 2 > (from 1). > NetworkManager: <info> User request for activation of ath0. > NetworkManager: <info> Activating device ath0 > NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) > scheduled... > NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) > started... > NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device > Configure) scheduled... > NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) > complete. > NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device > Configure) starting... > NetworkManager: <info> Activation (ath0/wireless): access point 'Auto > GamerCorner' has security, but secrets are required. > NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device > Configure) complete. > NetworkManager: <WARN> get_secrets_cb(): Couldn't get connection > secrets: applet.c.3297 (get_secrets_dialog_response_cb): failed to hash > setting '802-11-wireless-security'.. > NetworkManager: <info> Activation (ath0) failed for access point > (GamerCorner) > NetworkManager: <info> Marking connection 'Auto GamerCorner' invalid. > NetworkManager: <info> Activation (ath0) failed. > NetworkManager: <info> Deactivating device ath0. > > --------------------------------------------------- > > [EMAIL PROTECTED]:~/Code/network-manager-applet]$ nm-applet --sm-disable > > ** (nm-applet:4949): WARNING **: No connections defined > > ** (nm-applet:4949): WARNING **: No networks found in the configuration > database > ** Message: <info> No keyring secrets found for Auto > GamerCorner/802-11-wireless-security; ask the user > > ** Message: <info> Got setting name: 802-11-wireless-security > > > ** (nm-applet:4949): CRITICAL **: nm_setting_to_hash: assertion > `NM_IS_SETTING (setting)' failed > > ** (nm-applet:4949): WARNING **: applet.c.3295 > (get_secrets_dialog_response_cb): failed to hash setting > '802-11-wireless-security'. > > NM 0.7 also can't connect to an open wireless point, but wpa_supplicant works fine. Here's the output from this test. Also, in both cases I started wpa_supplicant with the '-u' and '-B' flags before NetworkManager.
[EMAIL PROTECTED]:~]$ sudo /usr/sbin/NetworkManager --pid-file=/var/run/NetworkManager/NetworkManager.pid --no-daemon [sudo] password for jgoguen: NetworkManager: <info> starting... NetworkManager: <info> eth0: Device is fully-supported using driver 'sky2'. NetworkManager: <info> (eth0): exporting device as /org/freedesktop/Hal/devices/net_00_17_f2_2b_c6_20 NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. NetworkManager: <info> Bringing up device eth0 NetworkManager: <info> Deactivating device eth0. NetworkManager: <info> ath0: Device is fully-supported using driver 'ath_pci'. NetworkManager: <info> (ath0): exporting device as /org/freedesktop/Hal/devices/net_00_16_cb_bc_a6_4b NetworkManager: <info> Now managing wireless (802.11) device 'ath0'. NetworkManager: <info> Bringing up device ath0 NetworkManager: <info> Deactivating device ath0. NetworkManager: <info> (eth0) supplicant interface is now in state 2 (from 1). NetworkManager: <info> (ath0) supplicant interface is now in state 2 (from 1). NetworkManager: <info> User request for activation of ath0. NetworkManager: <info> Activating device ath0 NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ath0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ath0/wireless): connection 'Auto Crumbs' requires no security. No secrets needed. NetworkManager: <info> Config: added 'ssid' value 'Crumbs' NetworkManager: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager: <info> Activation (ath0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> (ath0) Supplicant interface state change: 2 -> 0 NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> (ath0) Supplicant interface state change: 0 -> 2 NetworkManager: <info> (ath0) Supplicant interface state change: 2 -> 3 NetworkManager: <info> ath0: link timed out. NetworkManager: <info> (ath0) Supplicant interface state change: 3 -> 0 NetworkManager: <info> (ath0) Supplicant interface state change: 0 -> 2 NetworkManager: <info> (ath0) Supplicant interface state change: 2 -> 3 NetworkManager: <info> Activation (ath0/wireless): association took too long, failing activation. NetworkManager: <info> Activation (ath0) failed for access point (Crumbs) NetworkManager: <info> Marking connection 'Auto Crumbs' invalid. NetworkManager: <info> Activation (ath0) failed. NetworkManager: <info> Deactivating device ath0. NetworkManager: <WARN> remove_network_cb(): Couldn't remove network from supplicant interface: The requested network does not exist.. -- Joel Goguen http://jgoguen.ca/ The goal of Computer Science is to build something that will last at least until we've finished building it. _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
