Hello, Here we go.
The following is routing table built by NetworkManager: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.109.161 192.168.1.1 255.255.255.255 UGH 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 tap0 10.0.109.161 is VPN Gateway, 192.168.1.0/24 is my local network. Remote network is 10.1.0.0/24, but it isn't shown here - since all VPN devices are P-t-P from NM's point of view, the last rule is just enough to route all the traffic through VPN connection. Correct routing table produced by OpenVPN daemon itself (without NM) is as follows: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.109.161 192.168.1.1 255.255.255.255 UGH 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 tap0 Here we have an explicit route to remote network and correct default route via host 10.1.0.1 reachable through tap0. The patch is in the works. Regards, Valentine Sinitsyn _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
