This is a resend since the last mail seems to be lost. >> I can replicate this reliably by restarting the NM daemon. That always >> leaves my AP off the list. I can also reliably find my AP again by using >> "Create Net Wireless Network". When the new network fails to connect it >> will always show my AP (and the rest of them) again. Sometimes it takes >> a short while for it to appear, but it always does. Seems like a >> scanning delay. >> >> Stopping NM, removing the wireless kernel module, insmod it and starting >> NM again also has the effect of making it find my AP again. > > So this is pointing more towards a driver problem. If you ever have to > rmmod/insmod and stuff starts magically working again, it is almost > always a driver issue. > > One more question: does your AP almost always show with 'iwlist', but > usually never when doing the dbus-send to the supplicant? > > You might also try to do an 'iwlist' and then right afterwards, poke the > supplicant with the dbus-send command and see if your AP is in the list. > If the iwconfig and the supplicant-reported APs are quite different, > then the supplicant is the problem. > > If you can poke around a bit with these things, let me know what happens > so we can narrow down the issue further. >
I can't get this to work anymore. Last time wpa_supplicant wasn't started a bootup so I started it manually. [EMAIL PROTECTED] ~]# dbus-send --system --dest=fi.epitest.hostap.WPASupplicant --print-reply /fi/epitest/hostap/WPASupplicant/Interfaces/1 fi.epitest.hostap.WPASupplicant.Interface.scanResults Error org.freedesktop.DBus.Error.UnknownMethod: Method "scanResults" with signature "" on interface "fi.epitest.hostap.WPASupplicant.Interface" doesn't exist I can't restart wpa_supplicant unless I stop NM first. And I still can get the dbus command to work. (a while later..) Hmm... now it works again. I was rmmodding/insmodding the iwl4965 modul with debug and other paramaters and stopping/starting NM while this happened. iwlist scan and the supplicant list match pretty good. Having the same number of APs after a iwlist scan. iwlist doesn't always show my AP an neither does supplicant. But they seem to agree on showing the same APs. The list of AP also goes from 3 to 14 found and anything in between. The scans have no effect on what is show in the applet. When the bug is in effect the number of found APs is 4-8 and my AP isn't found by NM or supplicant. Hope this helps Rene _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
