Neal Becker wrote: > If I use nm (NetworkManager-0.7.0-0.9.3.svn3623.fc9.x86_64) to setup > openvpn, it wants to route: > /sbin/route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 71.168.34.70 192.168.1.1 255.255.255.255 UGH 0 0 0 > eth0 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 > eth0 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 > wlan0 > 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 > tun0 > > That's no good, I don't want the default route set to tun0. Here's what I > have if I manually start openvpn: > /sbin/route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 10.4.0.49 0.0.0.0 255.255.255.255 UH 0 0 0 > tun0 > 10.4.0.0 10.4.0.49 255.255.255.0 UG 0 0 0 > tun0 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 > wlan0
I see, I needed to fill in the 'use vpn for addresses' under the 'advanced' tab. _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
