Em Seg, 2008-08-04 às 12:00 -0400, Dan Williams escreveu:
>
> Can you try to change "ap_scan=2" at the top of your supplicant config
> to "ap_scan=1"? mac80211-based drivers are known to fail with
> ap_scan=2.
>
>
In my original supplicant config I didn't set the ap_scan value, it was
chosen by the system. I tried to set it as you suggested, but it didn't
help. Actually, it made things a little bit worse, eith ap_scan=2 in the
top of the config not even the wpa_supplicant work any more.
Paulo
Here is my supplicant config file (without the ap_scan=2, so it can work
with wpa_supplicant):
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=adm
update_config=1
network={
ssid="IMECC"
key_mgmt=IEEE8021X
eap=TTLS
identity="pjssilva"
phase2="auth=PAP"
ca_cert="/etc/pki/IMECC-CA/cacert.crt"
}
_______________________________________________
NetworkManager-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/networkmanager-list
