Thanks Dan. Here is the output: NetworkManager: <info> Activation (ttyACM0) starting connection 'Auto GSM network connection' NetworkManager: <info> (ttyACM0): device state change: 3 -> 4 NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <debug> [1226010840.735911] nm_serial_device_open(): (ttyACM0) opening device... NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <debug> [1226010840.841058] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 ' NetworkManager: <debug> [1226010840.869797] nm_serial_debug(): Got: 'ATZ E0 V1 X4 &C1 +FCLASS=0 ' NetworkManager: <debug> [1226010840.880689] nm_serial_debug(): Got: 'ATZ E0 V1 X4 &C1 +FCLASS=0
ERROR ' NetworkManager: <WARN> init_done(): Modem initialization failed NetworkManager: <info> (ttyACM0): device state change: 4 -> 9 NetworkManager: <debug> [1226010840.880892] nm_serial_device_close(): Closing device 'ttyACM0' NetworkManager: <info> Marking connection 'Auto GSM network connection' invalid. NetworkManager: <info> Activation (ttyACM0) failed. NetworkManager: <info> (ttyACM0): device state change: 9 -> 3 NetworkManager: <info> (ttyACM0): deactivating device (reason: 0). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed The light on my laptop indicating that the device is on, never turned on using NM. But if I do: cu -l /dev/ttyACM0 AT+CFUN=1 Then the light does come on. I have 0.7~~svn20081018t105859-0ubuntu2~nm4 from the PPA on Intrepid. Thanks for your help. -James On Thu, 2008-11-06 at 07:35 -0500, Dan Williams wrote: > On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote: > > Hi, > > > > I just recently upgraded to the Lenovo W500 laptop which has a built-in > > Ericsson F2507g WAN card. Unfortunately I can't get this new card to > > work with NM because it needs to be turned on first. There is a thread > > about how to do this manually on Ubuntu: > > http://ubuntuforums.org/showthread.php?t=934013 > > NetworkManager does turn the card on with CFUN=1 already. I'll need > serial debug logging enabled to figure out what's going on with your > card. Stop NM, then as root run it like: > > NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon > > and try a connection. Attach the output of NM so we can figure out > what's actually going wrong here. > > Dan > > > My sim card doesn't require a password like the newer ones so this > > should be pretty simple. But I can't seem to make it work. I'm using > > the Ubuntu NM PPA. Any ideas? > > > > Thanks. > > > > -James > > > > _______________________________________________ > > NetworkManager-list mailing list > > NetworkManager-list@gnome.org > > http://mail.gnome.org/mailman/listinfo/networkmanager-list > _______________________________________________ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list