Hello, I'm using Ubuntu 9.04, and I'm trying to configure my ZTE 636 Mobile Broadband modem to connect to the Cellcom/Israel network. If I use the default settings provided by Ubuntu, the connection could be established, but I could make no actual connection to anywhere on the internet (trying to ping any known IP addresses results in timeouts).
However, I've managed to get it working with wvdial, here is what my wvdial.conf looks like: [Dialer Defaults] Phone = *99# Username = abc Password = abc New PPPD = yes Modem = /dev/ttyUSB2 Baud = 460800 Init1 = ATZ Init2 = AT&F &D2 &C1 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"IP","internetg" ISDN = off Modem Type = Analog Modem Dial Attempts = 1 Abort on No Dialtone = off Stupid Mode = on I think the critical part here are those four modem initialization commands: Init1 = ATZ Init2 = AT&F &D2 &C1 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"IP","internetg" is there anyway to apply those commands from inside network manager? Do you recommend some other way? Many thanks! Samer
_______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
