It may be your provider. I use Verizon, and to make mine work, I had to edit the connection and enter a username/password. Verizon's is <10 digit TN>@vzw3g.com with a password of vzw. Some providers don't require a password, but yours might.
Trey Nolen On Sun, 2009-09-13 at 22:47 +0100, Robert Piasek wrote: > Hi, > > I'm trying to connect my Nokia N95 using phonet driver and NM. Device is > picked up by kernel and properly initialized, but it doesn't connect due to > some problems with ppp. Please have a look on log below and let me know what > can be done to make it work. > > > Sep 13 22:40:26 [kernel] [39436.837937] usb 2-1.2: new full speed USB device > using ehci_hcd and address 10 > Sep 13 22:40:26 [kernel] [39436.930958] usb 2-1.2: New USB device found, > idVendor=0421, idProduct=0070 > Sep 13 22:40:26 [kernel] [39436.930966] usb 2-1.2: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 > Sep 13 22:40:26 [kernel] [39436.930973] usb 2-1.2: Product: Nokia N95 8GB > > Sep 13 22:40:26 [kernel] [39436.930977] usb 2-1.2: Manufacturer: Nokia > > Sep 13 22:40:26 [kernel] [39436.931170] usb 2-1.2: configuration #1 chosen > from > 1 choice > Sep 13 22:40:26 [kernel] [39436.941261] cdc_acm 2-1.2:1.10: ttyACM1: USB ACM > device > Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): found serial port > (udev:GSM hal:GSM)_ > Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): new Modem device (driver: > 'cdc_acm')_ > Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): exported as > /org/freedesktop/Hal/devices/usb_device_421_70_noserial_if0_0_serial_unknown_1_ > Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): device state change: 1 -> > 2 (reason 2)_ > Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): deactivating device > (reason: 2)._ > Sep 13 22:40:32 [NetworkManager] nm_ip4_config_add_nameserver: assertion > `nameserver != s' failed > Sep 13 22:40:32 [NetworkManager] <info> Policy set 'Auto eth2' (eth2) as > default for routing and DNS._ > Sep 13 22:40:32 [NetworkManager] > nm_system_device_flush_ip4_routes_with_iface: > assertion `iface_idx >= 0' failed > Sep 13 22:40:32 [NetworkManager] > nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' > failed > Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): device state change: 2 -> > 3 (reason 0)_ > Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) starting > connection 'Three'_ > Sep 13 22:40:44 [NetworkManager] <info> (ttyACM1): device state change: 3 -> > 4 (reason 0)_ > Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 > (Device Prepare) scheduled..._ > Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 > (Device Prepare) started..._ > Sep 13 22:40:44 [NetworkManager] Invalid bits (0). Valid values are 5, 6, 7, > 8. > Sep 13 22:40:44 [NetworkManager] Invalid parity ( > Sep 13 22:40:44 [NetworkManager] Invalid stop bits (0). Valid values are 1 > and > 2) > Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 > (Device Prepare) complete._ > Sep 13 22:40:45 [NetworkManager] <info> (ttyACM1): powering up..._ > Sep 13 22:40:45 [NetworkManager] <info> Registered on Home network_ > Sep 13 22:40:45 [NetworkManager] <info> Associated with network: +COPS: > 0,2,"23420",2_ > Sep 13 22:40:45 [NetworkManager] <info> Connected, Woo!_ > Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 > (Device Configure) scheduled..._ > Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 > (Device Configure) starting..._ > Sep 13 22:40:45 [NetworkManager] <info> (ttyACM1): device state change: 4 -> > 5 (reason 0)_ > Sep 13 22:40:45 [NetworkManager] <info> Starting pppd connection_ > Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 > (Device Configure) complete._ > Sep 13 22:40:45 [pppd] Plugin /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so loaded. > Sep 13 22:40:45 [pppd] pppd 2.4.4 started by root, uid 0 > Sep 13 22:40:45 [pppd] Baud rate for /dev/ttyACM1 is 0; need explicit baud > rate > Sep 13 22:40:46 [pppd] Exit. > Sep 13 22:40:46 [NetworkManager] <WARN> ppp_exit_code(): ppp pid 9500 exited > with error: Fatal pppd error_ > Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): device state change: 5 -> > 9 (reason 14)_ > Sep 13 22:40:46 [NetworkManager] <info> Marking connection 'Three' invalid._ > Sep 13 22:40:46 [NetworkManager] <info> Activation (ttyACM1) failed._ > Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): device state change: 9 -> > 3 (reason 0)_ > Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): deactivating device > (reason: 0)._ > Sep 13 22:40:46 [NetworkManager] nm_ip4_config_add_nameserver: assertion > `nameserver != s' failed > Sep 13 22:40:46 [NetworkManager] <info> Policy set 'Auto eth2' (eth2) as > default for routing and DNS._ > Sep 13 22:40:46 [NetworkManager] > nm_system_device_flush_ip4_routes_with_iface: > assertion `iface_idx >= 0' failed > Sep 13 22:40:47 [NetworkManager] > nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' > failed > > > Thanks, > Rob > _______________________________________________ > NetworkManager-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
