hi,dan!i have tested nm0.7.1 in my ARM11 board,use usbserial driver,it can probe 3g modem and can connect 3G network successfully! But it connect successfully the first time ,init modem timeout the next time ,unless reinsert 3g wirless card and intilialize ! I have found that it caused by havn't ATH before reconnect!
在2009-09-20?22:36:32，"Dan?Williams"?<[email protected]>?写道： >On?Thu,?2009-09-10?at?17:32?+0800,?tommy?tommy?wrote: >>?hi,Dear?Dan! >>? >>?Now?i?met?a?problem?with?usb?evdo?card! >>? >>?When?i?insmod?usbserial?with?vendor?id?and?product?id,pppd?connect?OK >>?with?ttyUSB1?and?can?access?internet?with?ppp0! >>? >>?But?I?want?to?use?Networkmanager?with?ppp,because?ppp0?isn't?a >>?standard?platform?device?,it?is?kernel?virtual?net >>?(/sys/device/virtual/net/ppp0),causes?HAL?can't?know?it?is?a?real >>?network,Networkmanager?depend?on?HAL! >>? >>?Serveral?days?ago?i?have?fix?marvell8686?driver?kernel?hotplug >>?bug,does?usbserial?driver?miss?similiar?issue?? > >NM?0.7.1?and?later?probe?modems?dynamically?to?figure?out?their >capabilities.??But?it?doesn't?probe?devices?driven?by?'usbserial'?since >they?are?not?generally?supposed?to?be?3G?modems. > >Your?3G?modem?USB?ids?should?be?added?to?'option'?(for?Option,?ZTE, >Huawei,?Novatel,?etc?devices)?or?'sierra'?(for?Sierra?devices),?because >those?drivers?enable?the?high-speed?communication?that?3G?devices?are >used?for. > >usbserial?is?not?built?for?high-speed?communication?and?thus?your >transfer?rates?will?be?quite?limited.??If?you?add?your?modems?IDs?to?a >known?mobile?broadband?driver?(like?'option')?it?should?get?picked?up?by >NM. > >Dan > > >>?Thanks?all! >>? >>?Platform?:ARM11 >>?Linux?kernel?version:2.6.24.2 >>? >>?to...@china >
_______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
