On Mon, 2009-11-30 at 09:16 +0100, Alessandro Bono wrote: > On Sun, 2009-11-29 at 23:50 -0800, Dan Williams wrote: > > On Fri, 2009-11-27 at 11:56 +0100, Alessandro Bono wrote: > > > Hi all > > > > > > I have an onda mt503hsa that worked without problem with networkmanager > > > 0.7, after upgrade system to ubuntu karmic and networkmanager 0.8 + > > > modem-manager I have a problem with correct port selection > > > Modem manager sometimes choose incorrect port ttyUSB1 instead of ttyUSB2 > > > to open ppp connection, this depends on which port is probed first > > > below a log with correct and incorrect port selection > > > > What is the 'lsusb' output when the modem is plugged in an modeswitched? > > We need to make sure the device is listed in 77-mm-zte-port-types.rules > > with the correct port. The port #s there were taken from the ZTE > > windows drivers, so if this is a newer device we may need to just add > > it. > Hi Dan > > lsusb -v log below > > Bus 002 Device 008: ID 19d2:0037 ONDA Communication S.p.A.
That's the value I want :) I found the correct port tag for your device and pushed to modem-manager. Can you also do an experiment for me? I need to determine the aux port #. I want to find out which ports respond to AT commands. Most will, one or more won't. For each of the ones that *do* (use minicom or screen or whatever and send "ATI" to the port), please do the following: cd -P /sys/class/tty/ttyUSBx (where of course X is the tty number) pwd and the 'pwd' will print out something like this: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.1/tty/ttyACM0 which is what I'm interested in. Thanks! Dan _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
