On Sat, 2010-07-31 at 16:22 +0200, ivan vadovic wrote: > Hi, > > I got hold of the ericsson gc85 edge pcmcia card and would like to make it > work > with network-manager automatically. It seems to me all that's needed is > sending > at+cfun=1 to the modem. Could someone with knowledge of the internals hack it > in, please? What follows is the card info and the relevant modem-manager log.
Ok, so the card doesn't reply to *anything* unless you send AT+CFUN=1 first? I've considered buying one of these off ebay but figured they were so old nobody cared anymore :) Dan > > $ lspcmcia -v > Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:01:01.0) > Configuration: state: on ready: unknown > Voltage: 3.3V Vcc: 3.3V Vpp: 0.0V > Socket 0 Device 0: [serial_cs] (bus ID: 0.0) > Configuration: state: on > Product Name: Sony Ericsson GC85 PC Card ML2022 > Identification: manf_id: 0x0221 card_id: 0x2000 > function: 2 (serial) > prod_id(1): "Sony Ericsson" (0xe83885c1) > prod_id(2): "GC85 PC Card" (0x111f5216) > prod_id(3): "ML2022" (0x752b7cb1) > prod_id(4): --- (---) > > > ** Message: (ttyS2) opening serial device... > ** (modem-manager:2516): DEBUG: <1280583845.999521> (ttyS2) device open count > is > 1 (open) > ** (modem-manager:2516): DEBUG: (ttyS2): probe requested by plugin 'Generic' > ** (modem-manager:2516): DEBUG: <1280583846.99892> (ttyS2): --> 'AT+GCAP<CR>' > ** (modem-manager:2516): DEBUG: <1280583847.585207> (ttyS2): <-- > '<CR><LF>*MRDY: > 1<CR><LF>' > ** (modem-manager:2516): DEBUG: <1280583850.1890> (ttyS2): --> 'AT+GCAP<CR>' > ** (modem-manager:2516): DEBUG: <1280583850.802946> (ttyS2): <-- > 'AT+GCAP<CR><CR><LF>ERROR<CR><LF>' > ** (modem-manager:2516): DEBUG: Got failure code 100: Unknown error > ** (modem-manager:2516): DEBUG: <1280583850.803091> (ttyS2): --> 'AT+GCAP<CR>' > ** (modem-manager:2516): DEBUG: <1280583851.604127> (ttyS2): <-- > 'AT+GCAP<CR><CR><LF>ERROR<CR><LF>' > ** (modem-manager:2516): DEBUG: Got failure code 100: Unknown error > ** (modem-manager:2516): DEBUG: <1280583851.604263> (ttyS2): --> 'ATI<CR>' > ** (modem-manager:2516): DEBUG: <1280583852.4832> (ttyS2): <-- > 'ATI<CR><CR><LF>ERROR<CR><LF>' > ** (modem-manager:2516): DEBUG: Got failure code 100: Unknown error > ** (modem-manager:2516): DEBUG: <1280583852.4992> (ttyS2): --> 'AT+CPIN?<CR>' > ** (modem-manager:2516): DEBUG: <1280583852.906086> (ttyS2): <-- > 'AT+CPIN?<CR>' > ** (modem-manager:2516): DEBUG: <1280583855.999449> (ttyS2) device open count > is > 0 (close) > ** Message: (ttyS2) closing serial device... > ** Message: (ttyS2) opening serial device... > ** (modem-manager:2516): DEBUG: <1280583855.999837> (ttyS2) device open count > is > 1 (open) > ** (modem-manager:2516): DEBUG: <1280583855.999900> (ttyS2): --> 00 78 f0 7e > ** (modem-manager:2516): DEBUG: <1280583857.789206> (ttyS2): <-- 0d 0a 45 52 > 52 > 4f 52 0d 0a 00 78 f0 7e > ** (modem-manager:2516): DEBUG: <1280583857.789299> (ttyS2): --> 00 78 f0 7e > ** (modem-manager:2516): DEBUG: <1280583857.793784> (ttyS2): <-- 00 78 f0 7e > > ** (modem-manager:2516): WARNING **: (ttyS2) failed to parse QCDM version info > command result: (2) DM command 0 response not long enough (got 1, expected at > least 55).. > ** (modem-manager:2516): DEBUG: <1280583857.793855> (ttyS2) device open count > is > 0 (close) > ** Message: (ttyS2) closing serial device... > > > Thanks. > -- > Ivan Vadovic > _______________________________________________ > networkmanager-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ networkmanager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
