On Fri, Aug 26, 2011 at 4:08 AM, Dan Williams <[email protected]> wrote:
> On Thu, 2011-08-25 at 17:02 -0500, Dan Williams wrote: > > On Fri, 2011-08-26 at 03:12 +0530, [email protected] wrote: > > > > > > > > > On Fri, Aug 26, 2011 at 1:54 AM, Dan Williams <[email protected]> wrote: > > > On Sun, 2011-08-21 at 01:50 +0530, [email protected] > > > wrote: > > > > Hi list, > > > > > > > > I had called my Mobile broadband provider Reliance to file a > > > complaint > > > > against the speed issues I am having with my internet > > > connection. I am > > > > having a 3.1 Mbps connection but end up getting about 0.1 > > > Mbps at > > > > times. > > > > > > > > > Could be the device, or it could be that a ton of people are > > > in your > > > sector/tower using data at the same time > > > > > > > The first question the customer care guys ask is that in > > > what mode is > > > > your device currently connected - High speed or CDMA 1X? > > > > Apparently, Folks at Reliance give away their own dialer to > > > connect to > > > > Internet in Windows and that software shows the current mode > > > of the > > > > connection. > > > > > > > > So I tell the customer care guy that I am using Linux > > > (Fedora 15, > > > > Gnome 3) and I do not know what connection mode is being > > > used. So they > > > > tell me to please check in some other Windows based system. > > > I know it > > > > is insane but one can't argue with a non-tech customer care > > > guy on > > > > such issues. They talk to me as if the problem is in my > > > Linux system - > > > > It is selecting the low speed mode. > > > > > > > > Is there any way to find out which mode is getting selected > > > - 1X or > > > > High speed? The device in use in Huawei EC1260. > > > > > > > > > It should be handled by ModemManager and NetworkManager in > > > Fedora 15 > > > already; it appears that MM is not able to find a second port > > > to query > > > for the current access technology (ie EVDO vs. 1X). Here are > > > some steps > > > you can do to help isolate the issue: > > > > > > in a root terminal: > > > > > > 1) mv /usr/sbin/modem-manager / > > > 2) killall -TERM modem-manager > > > 3) /modem-manager --debug > > > 4) connect, wait 30 seconds or so, and copy the output from > > > the terminal > > > running modem-manager into a reply to this mail > > > > > > To get back: > > > 1) Ctrl+C to kill modem-manager > > > 2) mv /modem-manager /usr/sbin/modem-manager > > > > > > and you should be good. > > > > > > Dan > > > > > > > Can I send some AT commands to ttyUSB0 to check? Could you > > > please help > > > > me with this? > > > > > > > > Also I do not get a signal strength indication in the > > > NetworkManager > > > > icon. I get four bars but no color. Is this by design? > > > > > > > > Thanks, > > > > Elison > > > > > > > _______________________________________________ > > > > networkmanager-list mailing list > > > > [email protected] > > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list > > > > > > > > > Hi, > > > I work at a city 100 Km from my home and face the problem at home > > > only. I go home only on weekends so will send you the output this > > > weekend. > > > > > > > > > Can I just replace the binary modem-manager with a simple script and > > > rename it to modem-manager? > > > > > > > > > 0) cd /usr/sbin > > > 1) mv modem-manager orig.modem-manager > > > 2) Create a script /usr/sbin/modem-manager : > > > #!/bin/bash > > > ./orig.modem-manager --debug $* > /home/username/modem.log > > > > > > > Sure, that works too. > > One more thing; 'lsusb -v' output for the device would also be useful. > > Dan > > > Hi, I have not taken the debug as I think this is a GNOME 3 issue. I used the same device in Fedora 13 and Knoppix 6.7 and the taskbar icon shows 1X or EV according to the network mode selected. Best Regards, Elison
_______________________________________________ networkmanager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
