Hi,
I am trying to get GlobeTrotter HSDPA Modem to run with network manager 0.9 and
modem manager 0.5. Both are build from Gentoo ebuild system. Everything works
fine until the ip configuration should happen, which fails.
Here is the debug output:
Sep 5 08:47:28 ThinClient modem-manager[2056]: <debug> [mm-generic-gsm.c:4988]
simple_state_machine(): (ttyHS0): simple connect state 5
Sep 5 08:47:28 ThinClient modem-manager[2056]: <info> [mm-modem.c:742]
mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/1: state
changed (registered -> connecting)
Sep 5 08:47:28 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): --> 'AT_OCTI?<CR>'
Sep 5 08:47:28 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): <-- '<CR><LF>_OCTI:
1,3<CR><LF><CR><LF>OK<CR><LF>'
Sep 5 08:47:28 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): -->
'AT$QCPDPP=1,1,"vodafone","vodafone"<CR>'
Sep 5 08:47:29 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): <-- '<CR><LF>OK<CR><LF>'
Sep 5 08:47:29 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): --> 'AT_OWANCALL=1,0,1<CR>'
Sep 5 08:47:29 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): <-- '<CR><LF>OK<CR><LF>'
Sep 5 08:47:29 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): --> 'AT_OWANCALL=1,1,1<CR>'
Sep 5 08:47:29 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): <-- '<CR><LF>OK<CR><LF>'
Sep 5 08:47:30 ThinClient modem-manager[2056]: <debug>
[mm-at-serial-port.c:298] debug_log(): (ttyHS0): <-- '_OWANCALL: 1, 1<CR><LF>'
Sep 5 08:47:30 ThinClient modem-manager[2056]: <debug> [mm-port.c:181]
mm_port_set_connected(): (ttyHS0): port now connected
Sep 5 08:47:30 ThinClient modem-manager[2056]: <info> [mm-modem.c:742]
mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/1: state
changed (connecting -> connected)
Sep 5 08:47:30 ThinClient modem-manager[2056]: <debug> [mm-generic-gsm.c:4988]
simple_state_machine(): (ttyHS0): simple connect state 6
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 2 of 5 (Device Configure) scheduled...
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 2 of 5 (Device Configure) starting...
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> (ttyHS0): device state
change: prepare -> config (reason 'none') [40 50 0]
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 2 of 5 (Device Configure) successful.
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 3 of 5 (IP Configure Start) scheduled.
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 2 of 5 (Device Configure) complete.
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 3 of 5 (IP Configure Start) started...
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> (ttyHS0): device state
change: config -> ip-config (reason 'none') [50 70 0]
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <debug> [1315205250.785194]
[NetworkManagerUtils.c:878] nm_utils_get_proc_sys_net_value(): (ttyHS0): error
reading /proc/sys/net/ipv6/conf/ttyHS0/accept_ra: (4) Failed to open file
'/proc/sys/net/ipv6/conf/ttyHS0/accept_ra': No such file or directory
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> Activation (ttyHS0)
Stage 3 of 5 (IP Configure Start) complete.
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <warn> retrieving IP4
configuration failed: (32) Sending command failed: device is connected
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> (ttyHS0): device state
change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <warn> Activation (ttyHS0)
failed.
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <debug> [1315205250.789933]
[nm-device.c:3649] failed_to_disconnected(): (ttyHS0): running
failed->disconnected transition
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> (ttyHS0): device state
change: failed -> disconnected (reason 'none') [120 30 0]
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <info> (ttyHS0): deactivating
device (reason: 0).
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <debug> [1315205250.790191]
[nm-system.c:1349] flush_routes(): (ttyHS0) failed to lookup interface index
Sep 5 08:47:30 ThinClient NetworkManager[2044]: <debug> [1315205250.790589]
[nm-system.c:1349] flush_routes(): (ttyHS0) failed to lookup interface index
And this is what dbus-monitor shows me, when the ip config is retrieved:
signal sender=:1.7 -> dest=(null destination) serial=789
path=/org/freedesktop/NetworkManager/Devices/3;
interface=org.freedesktop.NetworkManager.Device.Modem; member=PropertiesChanged
array [
dict entry(
string "State"
variant uint32 30
)
dict entry(
string "Ip6Config"
variant object path "/"
)
dict entry(
string "Ip4Config"
variant object path "/"
)
]
Hso0 network device is available:
ifconfig hso0
hso0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
POINTOPOINT NOARP MULTICAST MTU:1486 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Any idea what is wrong here ?
Thanks & Regards
Gerald
_______________________________________________
networkmanager-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/networkmanager-list
