On 11/21/2011 12:45 PM, Chuck Anderson wrote:
I think you should support the common and documented format:DEVICE=eth0.43 which is documented in /usr/share/doc/initscripts-*/sysconfig.txt Ethernet 802.1q VLAN items: DEVICE=eth0.42 Initscripts use the device name for VLAN devices. Example: eth0.42 for vlan 42 on device eth0. Valid VLAN ID range is 0-4095. Most ethernet switches reserve VLAN ID 1 to be used as management VLAN; starting from VLAN ID 2 is recommended. REORDER_HDR=yes|no When enabled the VLAN device will move the ethernet header around to make it look exactly like a real ethernet device. This may help programs such as ISC dhcpd which read the raw ethernet packet and make assumptions about the location of bytes. If you don't need it turn it off because there is a small performance penalty. Default is on. GVRP=yes|no When enabled, this will announce new vlan creation to a GVRP enabled trunk port on a switch. Default is off.
Ok, thanks Weiping Pan _______________________________________________ networkmanager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
