On Thu, 2011-10-27 at 11:29 -0500, Dan Williams wrote: > On Thu, 2011-10-27 at 06:25 +0100, Sérgio Basto wrote: > > On Wed, 2011-10-26 at 19:53 -0500, Dan Williams wrote: > > > On Wed, 2011-10-26 at 17:48 +0100, Sérgio Basto wrote: > > > > Hi, on my HUAWEI E1550 HSDPA usb stick, > > > > > > > > If I do automatically , I got always > > > > Oct 26 17:33:19 segulix modem-manager[1014]: <info> (ttyUSB3) opening > > > > serial port... > > > > Oct 26 17:33:19 segulix modem-manager[1014]: Invalid error code: 500 > > > > Oct 26 17:33:19 segulix modem-manager[1014]: Invalid error code: 303 > > > > > > > > but now I checked, if I use PIN dialog that pop-up and go, very fast, to > > > > nm-applet to connect broad band , I got same error. > > > > If, I use PIN dialog , to unlock modem , and wait a few seconds, I > > > > connect without problems . > > > > In short, we have to wait a few time (one or two seconds) after unlock > > > > modem, to connect. > > > > > > THis could be a quirk with your modem's firmware, any chance you can > > > grab verbose modem-manager debug logs as described here? > > > > sure > > > > > > > http://live.gnome.org/NetworkManager/Debugging > > > > > > under the "3G" section. Basically, we need to see what your modem is > > > doing and how it's responding. Some modems do need quirks and we could > > > add one for yours. We'd also need to know what kind of modem and what > > > model it is. > > > > HUAWEI E1550 HSDPA usb stick, > > So what appears to be going on here is that obviously the modem isn't > unlocked when it's exported over D-Bus from MM. NM sees the new modem > and tries to enable it, successfully sends the pin, gets a reply from > MM, and then tries to enable the modem. It looks like a race between > modem-manager cleanup of the PIN unlock and NM trying to immediately > re-enable the modem after sending the PIN. So yeah, a bug in > ModemManager, but probably best to work around it in NM for now.
Hi, back to this topic , Now that we have on F-16 automatically unblock PIN, we just have to wait for closing doors like this, to dial/connect automatically. Feb 3 20:14:25 segulix modem-manager[1230]: <info> (ttyUSB0) closing serial port... Feb 3 20:14:25 segulix dbus-daemon[1160]: modem-manager[1230]: <info> (ttyUSB0) closing serial port... Feb 3 20:14:25 segulix modem-manager[1230]: <info> (ttyUSB0) serial port closed Feb 3 20:14:25 segulix dbus-daemon[1160]: modem-manager[1230]: <info> (ttyUSB0) serial port closed -- Sérgio M. B. _______________________________________________ networkmanager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
