On Aug 6, 2012 2:54 PM, "Aleksander Morgado" <[email protected]> wrote: > > > >>>> More or less, yes. You have the 'mmcli' utility in that branch, though, > >>>> so you can skip writing raw dbus-send commands and play with the cli > >>>> instead, like this (assuming only one modem connected, so index 0): > >>>> > >>>> Show modem info and status: > >>>> $> mmcli -m 0 > >>>> > >>>> Send PIN: > >>>> $> sudo mmcli -i 0 --pin=1234 > >>>> > >>>> Enable modem: > >>>> $> sudo mmcli -m 0 -e > >>>> > >>>> Connect: > >>>> $> sudo mmcli -m 0 --simple-connect="apn=internet" > > > > After this step, is it supposed to be possible to run a DHCP query > > against the wwan0 device? When I try, it just hangs (No response to > > DHCPDISCOVER). All look fine in the ModemManager output ((9/9): All > > done), and connection works fine with the same version of libqmi with > > the script that does this instead of the above steps: > > > > echo AT+CGDCONT=1,"IP","internet.netcom.no" > /dev/ttyUSB2 > > qmi-network /dev/cdc-wdm0 start > > > > (I used 'sudo mmcli -m 0 --simple-connect="apn=internet.netcom.no") > > > > No, the 'qmi-support' branch is still not able to get you connected, > work is still in progress. Whenever it's ready, hopefully during the > following weeks, I will let you know in the ML.
I actually got the connection up now using the method above (mmcli + ifup wwan0) so it seems to be close to functional now. How is the status of a NM that can use this new MM? Which parts/tasks are missing there? Btw: seems like the latest MM branch code did not build. -- Marius
_______________________________________________ networkmanager-list mailing list [email protected] https://mail.gnome.org/mailman/listinfo/networkmanager-list
