On Wed, 2013-10-02 at 13:45 -0700, Kenneth Berland wrote:
> AT&T says its a good account and that everything looks good from their
> end. They don't see any errors.
>
> If you're sure, I'll go down there and ask to put it in a hotspot and have
> them prove it.
Before you try a data connection, can you:
mmcli -m 0 -e
<wait a bit>
mmcli -m 0
and keep running that last command until the modem reports that it is no
longer "searching" for registration. Then lets see what the
registration is. For example:
3GPP | imei: 'xxxxxxxxx'
| enabled locks: 'none'
| operator id: '311480'
| operator name: 'Verizon Wireless'
----->>>> | registration: 'home'
Dan
> -KB
>
>
> On Wed, 2 Oct 2013, Kenneth Berland wrote:
>
> > Dan,
> >
> > Good to know. I had suspected as much, but was unable to confirm with AT&T
> > telephone support. I will visit the store (shudder) and see if they can
> > make
> > it work in another device.
> >
> > -KB
> >
> >
> > On Wed, 2 Oct 2013, Dan Williams wrote:
> >
> >> On Wed, 2013-10-02 at 08:05 -0700, Kenneth Berland wrote:
> >>> List,
> >>>
> >>> Trying to get a Sierra Wireless MC8355 - Gobi 3000 working on the AT&T
> >>> network here in the Bay Area. It works on T-Mobile (see my earlier post
> >>> to this list).
> >>>
> >>> NM moves along well until it errors-out with these lines (I think):
> >>>
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't
> >>> start
> >>> network: QMI protocol error (14): 'CallFailed'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> call end reason
> >>> (1018): 'gsm-wcdma-option-unsubscribed'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> verbose call end
> >>> reason (6,33): [3gpp] option-unsubscribed
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't get
> >>> current settings: QMI protocol error (15): 'OutOfCall'
> >>>
> >>> Is anyone running on AT&T who can share their configs?
> >>
> >> Unsubscribed may mean your SIM has not been activated with AT&T or has
> >> been *de*activated due to lack of use or something like that. Does it
> >> work in other devices, or in a phone?
> >>
> >> Dan
> >>
> >>> Here is what I think the relevant sysinfo might be, and below that are my
> >>> full logs for the time of the failure.
> >>>
> >>> TIA,
> >>> Ken
> >>>
> >>> ken@ken-x230: ~$ grep ModemManager /var/log/syslog* | grep starting |
> >>> tail
> >>> -1
> >>> /var/log/syslog.1:Oct 1 17:31:14 ken-x230 ModemManager[15881]: <info>
> >>> ModemManager (version 0.7.990) starting...
> >>> ken@ken-x230: ~$ NetworkManager --version
> >>> 0.9.9.0
> >>> ken@ken-x230: ~$ mmcli -L
> >>>
> >>> Found 1 modems:
> >>> /org/freedesktop/ModemManager1/Modem/4 [Sierra Wireless Inc] Sierra
> >>> Wireless MC8355 - Gobi 3000(TM) Module
> >>>
> >>> ken@ken-x230: ~$ mmcli -m 4
> >>>
> >>> /org/freedesktop/ModemManager1/Modem/4 (device id
> >>> '48e19cdd7c73e6030ba12406b9c0bd7cc283d929')
> >>> -------------------------
> >>> Hardware | manufacturer: 'Sierra Wireless Inc'
> >>> | model: 'Sierra Wireless MC8355 - Gobi 3000(TM)
> >>> Module'
> >>> | revision: 'D3200-STSUGN-1580 1 [Jul 08 2011
> >>> 18:00:00]'
> >>> | capabilities: 'gsm-umts'
> >>> | current: 'gsm-umts'
> >>> | equipment id: '35x569x423x602x'
> >>> -------------------------
> >>> System | device:
> >>> '/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4'
> >>> | drivers: 'qcserial, qmi_wwan'
> >>> | plugin: 'Gobi'
> >>> | primary port: 'cdc-wdm0'
> >>> -------------------------
> >>> Numbers | own : '1xxx693x3xx'
> >>> -------------------------
> >>> Status | lock: 'sim-pin2'
> >>> | unlock retries: 'sim-pin (3), sim-pin2 (3), sim-puk (10),
> >>> sim-puk2 (10)'
> >>> | state: 'registered'
> >>> | access tech: 'umts'
> >>> | signal quality: '92' (cached)
> >>> -------------------------
> >>> Modes | supported: '2g, 3g'
> >>> | allowed: '2g, 3g'
> >>> | preferred: 'none'
> >>> -------------------------
> >>> Bands | supported: 'cdma-bc15-aws, dcs, egsm, pcs, g850,
> >>> u2100,
> >>> u1900, u800, u850, u900'
> >>> | current: 'cdma-bc15-aws, dcs, egsm, pcs, g850,
> >>> u2100,
> >>> u1900, u800, u850, u900'
> >>> -------------------------
> >>> 3GPP | imei: '35xx6x04x34x02x'
> >>> | enabled locks: 'none'
> >>> | operator id: '310410'
> >>> | operator name: 'AT&T'
> >>> | registration: 'home'
> >>> -------------------------
> >>> SIM | path: '/org/freedesktop/ModemManager1/SIM/4'
> >>>
> >>>
> >>>
> >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> Modem enabling...
> >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled ->
> >>> enabling)
> >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> (ttyUSB1) opening
> >>> serial port...
> >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <warn> (ttyUSB1): port
> >>> attributes not fully set
> >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> (ttyUSB0) opening
> >>> serial port...
> >>> Oct 2 07:35:33 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'disabled' --> 'enabling' (reason: user-requested)
> >>> Oct 2 07:35:34 ken-x230 ModemManager[1811]: <info> Falling back to
> >>> previous state 'disabled'
> >>> Oct 2 07:35:34 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling ->
> >>> disabled)
> >>> Oct 2 07:35:34 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'enabling' --> 'disabled' (reason: unknown)
> >>> Oct 2 07:35:34 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) failed
> >>> to enable modem:
> >>> GDBus.Error:org.freedesktop.libqmi.Error.Protocol.InformationUnavailable:
> >>> Couldn't get serving system: QMI protocol error (74):
> >>> 'InformationUnavailable'
> >>> Oct 2 07:35:37 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (91)
> >>> Oct 2 07:35:37 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed
> >>> (unknown
> >>> -> umts)
> >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem enabling...
> >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled ->
> >>> enabling)
> >>> Oct 2 07:35:46 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'disabled' --> 'enabling' (reason: user-requested)
> >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (unknown -> registering)
> >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (registering -> home)
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem fully
> >>> enabled...
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling ->
> >>> registered)
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'enabling' --> 'registered' (reason: user-requested)
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> WWAN now enabled
> >>> by
> >>> management service
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Auto-activating
> >>> connection 'att'.
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) starting connection 'att'
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: disconnected -> prepare (reason 'none') [30 40 0]
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (91)
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
> >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect
> >>> started...
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (4/10): Wait to get fully enabled
> >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (5/10): Allowed mode
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (6/10): Bands
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (7/10): Register
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (8/10): Bearer
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (9/10): Connect
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered ->
> >>> connecting)
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: [/dev/cdc-wdm0] Allocating
> >>> new client ID...
> >>> Oct 2 07:35:49 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'registered' --> 'connecting' (reason: user-requested)
> >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: [/dev/cdc-wdm0] Registered
> >>> 'wds' (version 1.8) client with ID '1'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't
> >>> start
> >>> network: QMI protocol error (14): 'CallFailed'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> call end reason
> >>> (1018): 'gsm-wcdma-option-unsubscribed'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> verbose call end
> >>> reason (6,33): [3gpp] option-unsubscribed
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't get
> >>> current settings: QMI protocol error (15): 'OutOfCall'
> >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting ->
> >>> registered)
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'connecting' --> 'registered' (reason: user-requested)
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) failed
> >>> to connect modem: QMI protocol error (14): 'CallFailed'
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: prepare -> failed (reason 'unknown') [40 120 1]
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <warn> Activation
> >>> (cdc-wdm0) failed for connection 'att'
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: failed -> disconnected (reason 'none') [120 30 0]
> >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0):
> >>> deactivating device (reason 'none') [0]
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Auto-activating
> >>> connection 'att'.
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) starting connection 'att'
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: disconnected -> prepare (reason 'none') [30 40 0]
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
> >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
> >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect
> >>> started...
> >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (4/10): Wait to get fully enabled
> >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (5/10): Allowed mode
> >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (6/10): Bands
> >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (7/10): Register
> >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (8/10): Bearer
> >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (9/10): Connect
> >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered ->
> >>> connecting)
> >>> Oct 2 07:35:56 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'registered' --> 'connecting' (reason: user-requested)
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> error: couldn't
> >>> start
> >>> network: QMI protocol error (14): 'CallFailed'
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> call end reason
> >>> (1018): 'gsm-wcdma-option-unsubscribed'
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> verbose call end
> >>> reason (6,33): [3gpp] option-unsubscribed
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> error: couldn't get
> >>> current settings: QMI protocol error (15): 'OutOfCall'
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting ->
> >>> registered)
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'connecting' --> 'registered' (reason: user-requested)
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) failed
> >>> to connect modem: QMI protocol error (14): 'CallFailed'
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: prepare -> failed (reason 'unknown') [40 120 1]
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <warn> Activation
> >>> (cdc-wdm0) failed for connection 'att'
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: failed -> disconnected (reason 'none') [120 30 0]
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0):
> >>> deactivating device (reason 'none') [0]
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> WWAN now disabled
> >>> by management service
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem disabling...
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered ->
> >>> disabling)
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (0)
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed (umts
> >>> ->
> >>> unknown)
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'registered' --> 'disabling' (reason: user-requested)
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (home -> unknown)
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem fully
> >>> disabled...
> >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabling ->
> >>> disabled)
> >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'disabling' --> 'disabled' (reason: user-requested)
> >>> Oct 2 07:35:59 ken-x230 anacron[22871]: Job `cron.daily' started
> >>> Oct 2 07:35:59 ken-x230 anacron[22968]: Updated timestamp for job
> >>> `cron.daily' to 2013-10-02
> >>> Oct 2 07:35:59 ken-x230 cracklib: no dictionary update necessary.
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Auto-activating
> >>> connection 'att'.
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) starting connection 'att'
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): device
> >>> state change: disconnected -> prepare (reason 'none') [30 40 0]
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation
> >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect
> >>> started...
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (3/10): Enable
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem enabling...
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled ->
> >>> enabling)
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'disabled' --> 'enabling' (reason: user-requested)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (unknown -> registering)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (unknown -> searching)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <warn> Couldn't load
> >>> Operator Code: 'Current operator MCC/MNC is still unknown'
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <warn> Couldn't load
> >>> Operator Name: 'Current operator description is still unknown'
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (registering -> home)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (home -> searching)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem fully
> >>> enabled...
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling ->
> >>> searching)
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (4/10): Wait to get fully enabled
> >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (5/10): Allowed mode
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'enabling' --> 'searching' (reason: user-requested)
> >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> WWAN now enabled
> >>> by
> >>> management service
> >>> Oct 2 07:36:03 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (92)
> >>> Oct 2 07:36:03 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed
> >>> (unknown
> >>> -> umts)
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (6/10): Bands
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (7/10): Register
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (searching -> registering)
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP location updated (MCC:
> >>> '310',
> >>> MNC: '410', Location area code: '0', Cell ID: '0')
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (8/10): Bearer
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect state
> >>> (9/10): Connect
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (searching ->
> >>> connecting)
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed
> >>> (registering -> home)
> >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem
> >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting ->
> >>> registered)
> >>> Oct 2 07:36:04 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'searching' --> 'connecting' (reason: user-requested)
> >>> Oct 2 07:36:04 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem
> >>> state changed, 'connecting' --> 'registered' (reason: unknown)
> >>>
> >>> _______________________________________________
> >>> networkmanager-list mailing list
> >>> [email protected]
> >>> https://mail.gnome.org/mailman/listinfo/networkmanager-list
> >>
> >>
> >>
> >
_______________________________________________
networkmanager-list mailing list
[email protected]
https://mail.gnome.org/mailman/listinfo/networkmanager-list
