On Wed, 2013-12-18 at 01:04 +0100, Tore Anderson wrote: > * Tore Anderson > > > I'm working on setting up a test VPN server where I can reproduce it and > > generate a backtrace to share (I don't dare to do that towards my > > employer's VPN server). > > Ok, so now I have a dual-stacked OpenVPN test server running and I've > reproduced the problem there. It's all F20 RPMs, except that Nicolas > Iooss' patches was applied on top of NetworkManager-openvpn[-gnome]. > > I've attached the backtrace that ABRT grabbed after the crash happened. > > In case you or anyone else want to reproduce it, the test server is > greed.fud.no (87.238.35.145, 2a02:c0:1001:100::145), port 1194/tcp, LZO > compression enabled. It pushes two routes: 10.20.30.0/24 and > 2001:db8:1::/64. 10.20.30.40 and 2001:db8:1::1 should respond to pings > via the tunnel. Use the sample certificates included with OpenVPN - also > available at http://fud.no/nm-openvpn-ipv6/ along with the server's > config file. Prebuilt F20 RPMs of NetworkManager-openvpn[-gnome] with > the IPv6 patches applied are also found there.
I poked at this today, using this config and your openvpn-2.4.0 RPMs: [connection] id=openvpn IPv6 uuid=3c0ca914-7855-4dc1-9d55-2eea4050ecb3 type=vpn autoconnect=false [vpn] service-type=org.freedesktop.NetworkManager.openvpn comp-lzo=yes remote=87.238.35.145 ca=/usr/share/doc/openvpn/sample/sample-keys/ca.crt cert=/usr/share/doc/openvpn/sample/sample-keys/client.crt connection-type=tls cert-pass-flags=0 key=/usr/share/doc/openvpn/sample/sample-keys/client.key [ipv6] method=auto [ipv4] method=auto but got no response from the server. Is it still up and configured? I've at least verified that the NM-openvpn IPv6 changes don't cause problems for my existing openvpn configurations, so that's progress at least. Dan _______________________________________________ networkmanager-list mailing list [email protected] https://mail.gnome.org/mailman/listinfo/networkmanager-list
