On Mon, 2014-02-17 at 16:20 +0000, ning ji wrote:
> we're running release version, we used apt-get install in the ubuntu system 
> (arm platform).
> Will send error message when i can reproduce it.
> At this point, we do see such things, even though NM is still running and 
> ping still works for both eth ports.
>  /var/log/syslog.1:Jan 10 16:50:33 utilite-ubuntu-desktop 
> NetworkManager[2831]: <error> [1389390633.544433] [nm-manager-auth.c:87] 
> pk_authority_get(): Failed to initialize PolicyKit: (23) Error initializing 
> authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: 
> GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute 
> program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success

It looks like PolicyKit isn't running on your system.  Note that
NetworkManager doesn't *need* PolicyKit, but you need to specify that at
build time with "--disable-polkit".  So if you'd rather not run
PolicyKit, you can rebuild NM to work without it.  And in fact, if
you're on an embedded system, that's probably what you want to do.

Dan

> Many thanks !
> 
> 
> > Subject: Re: NetworkManager process dies sometimes
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]
> > Date: Fri, 14 Feb 2014 09:05:40 -0600
> > 
> > On Fri, 2014-02-14 at 03:45 +0000, ning ji wrote:
> > > This is for embedded system, kernel 3.0.35-cm-fx6-4,
> > > fs is using ubuntu 12.02。NetworkManager version is 0.9.4.
> > > 
> > > Since this is embedded system, there's no GUI, you can just view message 
> > > outputs from console.(BUT we do have 2 login sessions, 1 is for GUI, 
> > > don't ask me why, someone else did it)
> > > We use networkmanager to manager the 2 ethernet ports. Most of the time 
> > > it's fine.0Once a while no network connection, and turned out to be 
> > > networkmanager process has died.Pls note this could happen during 
> > > weekends, no one is touching the board, our application should has 
> > > nothing to with it.
> > > Also Not sure if related, but someone's board displays this,
> > > ** (process:31111): WARNING **: Could not initialize NMClient 
> > > /org/freedesktop/NetworkManager: Did not receive a reply. Possible causes 
> > > include: the remote application did not send a reply, the message bus 
> > > security policy blocked the reply, the reply timeout expired, or the 
> > > network connection was broken.
> > > Error: nmcli (0.9.4.0) and NetworkManager (unknown) versions don't match. 
> > > Force execution using --nocheck, but the results are unpredictable.
> > > The funny thing is, our NetworkManager is 0.9.4 from "--version".Where 
> > > should i get started on this pls ?                                        
> > >    
> > 
> > Are you able to get a crash trace from NetworkManager?  One way to do
> > this would be to run NetworkManager under 'gdb' if possible, and wait
> > until it fails, then do a "backtrace" command to see where NM crashed.
> > Ideally the board would also have NetworkManager build with debug
> > symbols too.
> > 
> > Would you be able to run NM under gdb and get a backtrace?
> > 
> > Would you also be able to get some syslog 'daemon' facility output as
> > well?  (usually /var/log/messages or /var/log/NetworkManager.log
> > or /var/log/daemon.log)
> > 
> > Dan
> > 
>                                         


_______________________________________________
networkmanager-list mailing list
[email protected]
https://mail.gnome.org/mailman/listinfo/networkmanager-list

Reply via email to