On Mon, 2015-07-27 at 13:30 +0200, Jean-Christian de Rivaz wrote: > In this observation NetworkManager still think that eth0 is disconnected > while he correctly logged the message 'link connected':
Just to make sure, the ethernet connection being used is autoconnect=true, right? nmcli con show "<the connection name>" | grep autoconnect will tell you. Dan > Jul 27 07:46:24 x NetworkManager[2184]: <info> Activation (ppp0) > successful, device activated. > Jul 27 08:20:09 x NetworkManager[2184]: <info> (eth0): link disconnected > (deferring action for 4 seconds) > Jul 27 08:20:13 x NetworkManager[2184]: <info> (eth0): link disconnected > (calling deferred action) > Jul 27 08:20:13 x NetworkManager[2184]: <info> (eth0): device state > change: activated -> unavailable (reason 'carrier-changed') [100 20 40] > Jul 27 08:20:13 x NetworkManager[2184]: <info> (eth0): deactivating > device (reason 'carrier-changed') [40] > Jul 27 08:20:13 x NetworkManager[2184]: <info> (eth0): canceled DHCP > transaction, DHCP client pid 2270 > Jul 27 08:20:13 x NetworkManager[2184]: <info> Policy set 'gsm1' (ppp0) > as default for IPv4 routing and DNS. > Jul 27 12:59:30 x NetworkManager[2184]: <info> (eth0): link connected > Jul 27 12:59:30 x NetworkManager[2184]: <info> (eth0): device state > change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] > > root@x:/home/x# nmcli d > DEVICE TYPE STATE CONNECTION > ttyACM0 gsm connected gsm1 > ppp0 unknown connected ppp0 > eth0 ethernet disconnected -- > lo loopback unmanaged -- > sit0 sit unmanaged -- > wlan0 wifi unmanaged -- > > root@x:/home/x# ethtool eth0 > Settings for eth0: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 1 > Transceiver: external > Auto-negotiation: on > Link detected: yes > > root@x:/home/x# nmcli -v > nmcli tool, version 0.9.10.0 > > The state transition from 'unavailable' to 'disconnected' look rater > strange or did I miss something ? > > Jean-Christian > > > _______________________________________________ > networkmanager-list mailing list > [email protected] > https://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ networkmanager-list mailing list [email protected] https://mail.gnome.org/mailman/listinfo/networkmanager-list
