> On 03 July 2017 at 15:50 Colin Helliwell <[email protected]>
> wrote:
>
> > On 03 July 2017 at 15:39 Thomas Haller <[email protected]> wrote:
> >
....
> > ah, it's "modify", not "set".
> >
> > nmcli device modify enp0s25 ipv4.route-metric 42
>
> Ok, no error to the command now, but 'route -n' indicates no change has
> occurred:
>
> root@wg6s:~# route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 0.0.0.0 192.168.10.254 0.0.0.0 UG 100 0 0 eth0
> 0.0.0.0 10.65.106.176 0.0.0.0 UG 400 0 0 ppp0
> 10.65.106.176 0.0.0.0 255.255.255.255 UH 400 0 0 ppp0
> 192.168.10.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
>
> and the RTD of a ping also suggests the 'preference' is un-changed.
>
A bit more info on this. I tried the command on my eth0 connection, and it did
indeed result in [according to 'ip route'] a change to the metric.
But it doesn't on my gsm connection. I wonder if it's to do with their
differing natures: eth0 is both the network interface name and the NM device
name, whereas the gsm interface is ppp0 but the NM device is ttyMux1. Maybe not
a simple text difference as such, but the fact that the latter is on top of PPP.
Logging the command on the two:
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.1376]
device[0x486490] (eth0): reapply (version-id 11)
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.1486]
device[0x486490] (eth0): reapplying wired settings
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.1489]
device[0x486490] (eth0): set-link: ignore link negotiation
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.1492]
firewall: [0x4dadb8,change*:"eth0"]: firewall zone change eth0:default (not
running, simulate success)
Jul 6 13:17:45 wg daemon.info dhclient: Received signal 15, initiating
shutdown.
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.1509]
kill child process 'dhcp-client-eth0' (1199): waiting up to 500 milliseconds
for process to terminate normally after sending SIGTERM (15)...
Jul 6 13:17:45 wg daemon.info dhclient: DHCPRELEASE on eth0 to 192.168.10.254
port 67
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.6510]
kill child process 'dhcp-client-eth0' (1199): sending SIGKILL...
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.6552]
kill child process 'dhcp-client-eth0' (1199): after sending SIGTERM (15) and
SIGKILL, process 1199 exited by signal 9 (504333 usec elapsed)
Jul 6 13:17:45 wg daemon.info NetworkManager[835]: <info> [1499343465.6557]
dhcp4 (eth0): canceled DHCP transaction, DHCP client pid 1199
Jul 6 13:17:45 wg daemon.info NetworkManager[835]: <info> [1499343465.6558]
dhcp4 (eth0): state changed bound -> done
Jul 6 13:17:45 wg daemon.info NetworkManager[835]: <info> [1499343465.6677]
dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds)
Jul 6 13:17:45 wg daemon.debug NetworkManager[835]: <debug> [1499343465.6680]
dhcp4 (eth0): creating composite dhclient config
/var/lib/NetworkManager/dhclient-eth0.conf
[etc]
vs.
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3624]
device[0x4c2388] (ttyMux1): reapply (version-id 14)
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3734]
firewall: [0x4daea0,change*:"ppp0"]: firewall zone change ppp0:default (not
running, simulate success)
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3741]
ip4_config_start
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3749]
pacrunner: call[0x4e84c0]: send: new config ({'Interface': <'ppp0'>, 'Method':
<'direct'>, 'BrowserOnly': <false>},)
Jul 6 13:29:49 wg daemon.info NetworkManager[835]: <info> [1499344189.3805]
audit: op="device-reapply" interface="ppp0" ifindex=4 args="ipv4.route-metric"
pid=1343 uid=0 result="success"
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3897]
pacrunner: call[0x4e84c0]: sending failed:
GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name "org.pacrunner"
does not exist
Jul 6 13:29:49 wg daemon.debug NetworkManager[835]: <debug> [1499344189.3944]
firewall: [0x4daea0,change*:"ppp0"]: complete: fake success
[nothing more after this]
(a similar not-much-activity occurs if I instead use nmcli connection modify
"$CON" ipv4.route-metric 42; nmcli device reapply "$DEV")
I'd also thought "well if I can't decrease the ppp metric, then I'll increase
the eth one instead", to achieve the change of preference. Trouble is that the
time that I'm doing this is when the ethernet connection is broken, so the dhcp
renewal fails, so the change of route doesn't happen.
_______________________________________________
networkmanager-list mailing list
[email protected]
https://mail.gnome.org/mailman/listinfo/networkmanager-list
