-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Il 12:16, luned� 6 maggio 2002, in merito a Re: [newbie-it] configurazione hardware
(scusate per la lunghezza), carmine de pasquale ha scritto:
> se pu� servire allego pnpdump
d
> (NAME "TAG2117/46803539[0]{LECTRON Winet ISDNExpress PnP}")
> > 2) scheda audio ectiva ev 1935 machone pci. non so come farla
> Multimedia audio controller: OPTi Inc. EV1935 ECTIVA MachOne
> PCI Audio (rev 16).
> Bus 0, device 12, function 0:
> VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 1).
> IRQ 10.
> Bus 1, device 0, function 0:
> VGA compatible controller: S3 Inc. Trio 64 3D (rev 1).
> > 5) non riesco ad avviare il serverx contemporaneamente con 2
> > schede video (agp e pci), anche se xf86cfg si avvia con
> > entrambe, le configura, ma quando parte il serverx mi d�
> > errore, riprova e parte con una sola scheda.
> *****************************************************************
>***** # Refer to the XF86Config(4/5) man page for details about
> the format of # this file.
> #
> *****************************************************************
>*****
>
> Section "Files"
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (they are concatenated
> together) # By default, Mandrake 6.0 and later now use a font
> server independent of # the X server to render fonts.
>
> FontPath "unix/:-1"
>
> EndSection
>
> #
> *****************************************************************
>***** # Server flags section.
> #
> *****************************************************************
>*****
>
> Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a
> signal is # received. This may leave the console in an unusable
> state, but may # provide a better stack trace in the core dump to
> aid in debugging #NoTrapSignals
>
> # Uncomment this to disable the <Crtl><Alt><BS> server abort
> sequence # This allows clients to receive this key event.
> #DontZap
>
> # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
> switching # sequences. This allows clients to receive these key
> events. #DontZoom
>
> # This allows the server to start up even if the
> # mouse device can't be opened/initialised.
> AllowMouseOpenFail
>
> EndSection
>
> #
> *****************************************************************
>***** # Input devices
> #
> *****************************************************************
>*****
>
> #
> *****************************************************************
>***** # Keyboard section
> #
> *****************************************************************
>*****
>
> Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "AutoRepeat" "250 30"
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "it"
>
> EndSection
>
> #
> *****************************************************************
>***** # Pointer section
> #
> *****************************************************************
>*****
>
> Section "InputDevice"
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5"
>
> # ChordMiddle is an option for some 3-button Logitech mice
>
> # Option "ChordMiddle"
>
> EndSection
>
>
>
> Section "Module"
>
> # This loads the DBE extension module.
> Load "dbe"
>
> # This loads the Video for Linux module.
> Load "v4l"
>
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
>
> SubSection "extmod"
> #Option "omit xfree86-dga"
> EndSubSection
>
> # This loads the Type1 and FreeType font modules
>
> Load "type1"
> Load "freetype"
> EndSection
>
> #
> *****************************************************************
>***** # Monitor section
> #
> *****************************************************************
>*****
>
> # Any number of monitor sections may be present
>
> Section "Monitor"
> Identifier "Generic|Multi-frequenza che raggiunge 1280x1024 a
> 60 Hz" VendorName "Unknown"
> ModelName "Unknown"
>
>
> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or
> a # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR
> MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS.
> HorizSync 31.5-64.3
>
>
> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values,
> or a # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR
> MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS.
> VertRefresh 50-90
>
>
> # This is a set of extended mode timings typically used for
> laptop, # TV fullscreen mode or DVD fullscreen output.
> # These are available along with standard mode timings.
>
> # Sony Vaio C1(X,XS,VE,VN)?
> # 1024x480 @ 85.6 Hz, 48 kHz hsync
> ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494
> 563 -hsync -vsync
>
> # 768x576 @ 79 Hz, 50 kHz hsync
> ModeLine "768x576" 50.00 768 832 846 1000 576 590 595
> 630 # 768x576 @ 100 Hz, 61.6 kHz hsync
> ModeLine "768x576" 63.07 768 800 960 1024 576 578 590
> 616
>
>
> EndSection
>
>
>
> #
> *****************************************************************
>***** # Graphics device section
> #
> *****************************************************************
>*****
>
> Section "Device"
> Identifier "Generic VGA"
> Driver "vga"
> EndSection
>
> Section "Device"
> Identifier "S3 Trio3D 2"
> VendorName "Unknown"
> BoardName "Unknown"
> Driver ""
> # VideoRam 4096
> # Clock lines
>
>
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
>
> Option "sw_cursor"
> Option "DPMS" "on"
> BusID "PCI:1:0:0"
> EndSection
>
>
>
> #
> *****************************************************************
>***** # Screen sections
> #
> *****************************************************************
>*****
>
>
> Section "Screen"
> Identifier "screen1"
> Device "S3 Trio3D 2"
> Monitor "Generic|Multi-frequenza che raggiunge 1280x1024
> a 60 Hz" DefaultColorDepth 24
> Subsection "Display"
> Depth 8
> Modes "1024x768" "800x600" "640x400"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> EndSection
>
>
> Section "ServerLayout"
> Identifier "layout1"
> Screen "screen1"
>
> InputDevice "Mouse1" "CorePointer"
>
> InputDevice "Keyboard1" "CoreKeyboard"
> EndSection
>
> > 6) per risolvere questi problemi vorrei usare vmware e la
> > condivisione di winzozz, ma il vmware mi d� problemi di
> > incompatibilit� e di mancanze di files sui sorgenti del kernel
>
> -vmware non � gratuito,
> -se il sistema ospitante (GNU/Linux nel tuo caso)
> non riconosce l'hardware, non risolve il problema
> -ti rallenta la macchina
> -si trascina i difetti del sistema ospite
>
>
> bye
>
> miKe
> ______________________________________
> Slackware 8 GNU/Linux 2.4.18 @ hp Xe3
> R.U.#219755 - S.R.U.#705 - R.M.#110932
- --
bye
miKe
______________________________________
Slackware 8 GNU/Linux 2.4.18 @ hp Xe3
R.U.#219755 - S.R.U.#705 - R.M.#110932
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE81ttRF/9fksDJ4y0RAgfyAJ0dK5fO6GIGTQ1Q9FaIlOn81A5VVwCeLrBA
jzY0CJbo+wJWRiziMW2I2ec=
=g4bI
-----END PGP SIGNATURE-----
