-----Messaggio originale-----
Da: carlo [mailto:[EMAIL PROTECTED]
Inviato: marted� 5 agosto 2003 17.16
A: [EMAIL PROTECTED]
Oggetto: sempre sulla scheda audio
Allora ho lanciato dmesg ed ecco il risultato:
Linux version 2.4.21-0.13mdk ([EMAIL PROTECTED]) (gcc version
3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST
2003BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820:
000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820:
00000000000f0000 - 0000000000100000 (reserved) BIOS-e820:
0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000
- 0000000007ff3000 (ACPI NVS) BIOS-e820: 0000000007ff3000 -
0000000008000000 (ACPI data) BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)127MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 quiet devfs=mount
acpi=off
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 392.562 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 783.15 BogoMIPS
Memory: 125988k/131008k available (1410k kernel code, 4632k reserved,
1118k data, 136k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)Inode
cache hash table entries: 8192 (order: 4, 65536 bytes)Mount cache hash
table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)Page-cache
hash table entries: 32768 (order: 5, 131072 bytes)CPU: L1 I cache: 16K,
L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000
00000000CPU: Common caps: 0183fbff 00000000 00000000
00000000CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 392.5542 MHz.
..... host bus clock speed is 112.1582 MHz.
cpu: 0, clocks: 1121582, slice: 560791
CPU0<T0:1121568,T1:560768,D:9,S:560791,C:1121582>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])mtrr:
detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfb210, last bus=1PCI: Using
configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port rangeisapnp: Card
'Creative ViBRA16X PnP'
isapnp: Card 'U.S. Robotics Sportster V.34+ FAX Internal'isapnp: 2 Plug
& Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039Initializing RT
netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])devfs:
boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xc8800000, size
4096kvesafb: mode is 800x600x16, linelength=1600, pages=7vesafb:
protected mode interface info at c000:5b8f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).Console:
switching to colour frame buffer device 80x16fb0: VESA VGA frame buffer
device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_I
RQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at port 0x03e8 (irq = 5) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024
blocksizeUniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4ide:
Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:02.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:piohda:
SAMSUNG SP4002H, ATA DISK drive
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)hdc: ATAPI CD-ROM
DRIVE 36X MAXIMUM, ATAPI CD/DVD-ROM driveide2: ports already in use,
skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63,
UDMA(33)Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27md: Autodetecting
RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4KbytesTCP: Hash tables
configured (established 8192 bind 16384)Linux IP multicast router 0.06
plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 232k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:02.2
ahc_pci:0:16:0: Host Adapter Bios disabled. Using default SCSI device
parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: Traxdata Model: CDR4120 Rev: 5.0Q Type:
CD-ROM ANSI SCSI revision: 02Journalled
Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:02.2
PCI: Sharing IRQ 11 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface
driverusbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journalAdding
Swap: 506008k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal
journalEXT3-fs: mounted filesystem with ordered data mode.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 00:0f.0
eth0: RealTek RTL-8029 found at 0xe400, IRQ 10,
00:40:33:A0:24:68.inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)sr0: scsi-1
drive
Uniform CD-ROM driver Revision: 3.12
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, UDMA(33)
Splash status on console 0 changed to off
Capisco che � una bella mazzata di roba, ma io non sono in grado di
capire se c'� il detect della scheda audio e quale � il
problema!!!Ancora grazie a tutti
