Since attempting to get my dvd player accepted as a scsi device, by editing
lilo.conf and fstab, I now have a device that doesn't appear to be either ide
or scsi. I can't install or uninstall software because it always asks for
the discs to be in cdrom1, and does not recognise it when I do that. The
only information I can find that's relevant follows:
fstab
/mnt/cdrom /mnt/cdrom supermount
dev=/dev/scd1,user,fs=iso9660,ro,--,iocharset=iso8859-15 0 0
/mnt/cdrom2 /mnt/cdrom2 supermount
dev=/dev/scd0,user,fs=iso9660,ro,--,iocharset=iso8859-15 0 0
(what are /dev/pts and /dev/shm?)
-------------
lilo.conf
image=/boot/vmlinuz
label=linux
root=/dev/hde7
initrd=/boot/initrd.img
append="devfs=mount hda=ide-scsi hdc=ide-scsi"
read-only
-----------------------------
file:/var/log/dmesg
hda: HITACHI DVD-ROM GD-5000, ATAPI CD/DVD-ROM drive
hdc: CR-48X9TE, ATAPI CD/DVD-ROM drive
hde: FUJITSU MPG3204AT E, ATA DISK drive
hdf: Maxtor 91731U4, ATA DISK drive
hdg: FUJITSU MPA3043ATU, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x9000-0x9007,0x8802 on irq 10
ide3 at 0x8400-0x8407,0x8002 on irq 10
hde: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(100)
hdf: 34004880 sectors (17410 MB) w/512KiB Cache, CHS=33735/16/63, UDMA(66)
hdg: 8544940 sectors (4375 MB), CHS=9042/15/63, UDMA(33)
hda: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA
-------------
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: CANON Model: IX-27025E Rev: 1.13
Type: Scanner ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: MITSUMI Model: CR-48X9TE Rev: 1.0C
Type: CD-ROM ANSI SCSI revision: 02
The Canon is my film scanner, as yet not functional, the Mitsumi is my CD-RW,
and the Hitachi is no where to be found. Has anyone any idea what is
happening?
Anne
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
