in a text console, without the quotes ; "su", > enter, > put in password for root, > enter, > "init 3" enter, login again as root when prompted type "XFdrake", > enter select the video card and server and display and save and exit and type "init 5" and see if that is better?
On Saturday 28 September 2002 10:53 am, you wrote: > Since no one here seems to have the answer to your question, you might > try searching the XFree86 website, searching their lists, etc. > > > > Quote below is from XFree86's website: ( > http://www.xfree86.org/4.2.0/Status6.html#6 ) > > "6. ATI > > *3.3.6:* > > Accelerated support is provided for the Mach8 chips (by the > XF86_Mach8 server), Mach32 chips (by the XF86_Mach32 server), the > following Mach64 and Rage chips: GX, CX, CT, ET, VT, VT3, GT, > RageII+DVD, RagePro (GB, GD, GI, FP, GQ), VT4, Rage IIC (GV, GW, > GZ), Rage LT Pro (LD, LB, LI, LP), Rage LT, Rage XL or XC (GL, GM, > GN, GO, GR, GS) and Rage Mobility (LM, LN, LR, LS) (by the > XF86_Mach64 server). Unaccelerated support is provided for most of > the above (except some early Mach8 and Mach32 adapters), as well the > old VGAWonder series chipsets (18800, 18800-1, 28800-2, 28800-4, > 28800-5, 28800-6) by the XF86_SVGA server with the ati driver. > Accelerated support is provided for the Rage 128 chips by the > XF86_SVGA server with the r128 driver. > > *4.2.0:* > > Accelerated support is provided for Mach64, Rage, Rage 128 and > Radeon chips by the "ati" driver, as is unaccelerated support for > all of the others except the Mach8 and some early Mach32 chips. > > *Summary:* > > All hardware supported in 3.3.6 is also supported in 4.2.0 except > for Mach8 and some old Mach32 chips." > > > > You might also try the Mandrake Expert lists. > > Erik > > rhp.mac wrote: > >>hi, > >> > >> > >>may you help me about this problem? > >> > >>>>my monitor blinking when I run kde. > >>>>I need to configure Xfree. I am running Mandrake, I don't > >>>>know how it is done. > >>>> > >>>>I am using: > >> > >> Graphic card: atimach 64 > >> > >> mandrake linux ppc 8.2 > >> > >> kernel version 2.4 .18.6.1 > >> > >>Xfre86 monitor choose/Imac/powerbook: 640x480(15 bits) > >> > >> I run KDE version 2.2.2 > >> > >> thanks for help > >> > >> > >>rhp > >> > >> > >>Want to buy your Pack or Services from MandrakeSoft? > >>Go to http://www.mandrakestore.com > > > >------------------------------------------------------------------------ > > > >Want to buy your Pack or Services from MandrakeSoft? > >Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
