Hi there i just installed mandrake-6.0 and i hawing a few probs when users try to telnet into my machine they only get asked for a password but no login? and no matter what they enter as password they wont be let in? any1 know why ? im also trying to get isdn dial up to work, i�ve configured my isdn card and it�s ok but when i try to dial in this comes in /var/log/messages ------------------------------------------------------------------------ ------------------------------------------------------------------------ ----------------------------------------------------------------------- Sep 13 01:34:22 bleh kernel: CSLIP: code copyright 1989 Regents of the Universi ty of California Sep 13 01:34:22 bleh kernel: ISDN subsystem Rev: 1.75/1.63/1.84/1.47/1.13/1.2 l oaded Sep 13 01:34:23 bleh kernel: HiSax: Linux Driver for passive ISDN cards Sep 13 01:34:23 bleh kernel: HiSax: Version 3.1a (module) Sep 13 01:34:23 bleh kernel: HiSax: Layer1 Revision 2.31 Sep 13 01:34:23 bleh kernel: HiSax: Layer2 Revision 2.16 Sep 13 01:34:23 bleh kernel: HiSax: TeiMgr Revision 2.11 Sep 13 01:34:23 bleh kernel: HiSax: Layer3 Revision 2.8 Sep 13 01:34:23 bleh kernel: HiSax: LinkLayer Revision 2.25 Sep 13 01:34:23 bleh kernel: HiSax: Approval certification valid Sep 13 01:34:23 bleh kernel: HiSax: Approved with ELSA Quickstep series cards Sep 13 01:34:23 bleh kernel: HiSax: Approval registration numbers: Sep 13 01:34:23 bleh kernel: HiSax: German D133361J CETECOM ICT Services GmbH Sep 13 01:34:23 bleh kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Sep 13 01:34:23 bleh kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) Sep 13 01:34:23 bleh kernel: HiSax: AVM driver Rev. 2.10 Sep 13 01:34:23 bleh kernel: AVM A1: Byte at 1b40 is 6 Sep 13 01:34:23 bleh kernel: AVM A1: Byte at 1b43 is 3 Sep 13 01:34:23 bleh kernel: AVM A1: Byte at 1b42 is 2 Sep 13 01:34:23 bleh kernel: AVM A1: Byte at 1b40 is 6 Sep 13 01:34:23 bleh kernel: HiSax: AVM A1 config irq:7 cfg:0x1B40 Sep 13 01:34:23 bleh kernel: HiSax: isac:0x1740/0x1340 Sep 13 01:34:23 bleh kernel: HiSax: hscx A:0x740/0x340 hscx B:0xF40/0xB40 Sep 13 01:34:23 bleh kernel: AVM A1: ISAC version (0): 2086/2186 V1.1 Sep 13 01:34:23 bleh kernel: AVM A1: HSCX version A: V2.1 B: V2.1 Sep 13 01:34:23 bleh kernel: AVM A1: IRQ 7 count 127668 Sep 13 01:34:23 bleh kernel: AVM A1: IRQ 7 count 127673 Sep 13 01:34:23 bleh kernel: HiSax: DSS1 Rev. 2.12 �Sep 13 01:34:23 bleh kernel: HiSax: module installed Sep 13 01:34:23 bleh ipppd: info: no CHAP secret entry for this user! Sep 13 01:34:23 bleh ipppd[3942]: Found 1 device: /dev/ippp0 Sep 13 01:34:23 bleh ipppd[3943]: ipppd i2.2.10 (isdn4linux version of pppd by MH) started Sep 13 01:34:23 bleh ipppd[3943]: init_unit: 0 Sep 13 01:34:23 bleh ipppd[3943]: Connect[0]: /dev/ippp0, fd: 7 Sep 13 01:34:38 bleh kernel: ippp0: dialing 1 5300100... Sep 13 01:34:39 bleh kernel: isdn_net: ippp0 connected Sep 13 01:34:39 bleh ipppd[3943]: Local number: 4565259, Remote number: 5300100 , Type: outgoing Sep 13 01:34:39 bleh ipppd[3943]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, l inkunit: 0, fd: 7 Sep 13 01:34:39 bleh ipppd[3943]: Remote message: Sep 13 01:34:39 bleh ipppd[3943]: MPPP negotiation, He: No We: No Sep 13 01:35:09 bleh ipppd[3943]: IPCP: timeout sending Config-Requests Sep 13 01:35:40 bleh ipppd[3943]: IPCP: timeout sending Config-Requests Sep 13 01:36:44 bleh last message repeated 2 times ------------------------------------------------------------------------ --------------------------------------------------------------- to me it looks like it is not reading the "/etc/ppp/chap-secrets" correctly coz i think i have it set right at least it works for others that have it exactly like me. as you can see it dials in but doesnt get a connection. maybe this is a pppd bug?? thanks in advance �sak Ben
