>El Dom 10 Nov 2002 19:37, John Richard Smith escribi�:
>
>
>>lm_sensors requires a slightly different collection of rpm packages
>>in M9.0 than in M8.2. Here is what I found to be necessary,
>>
>>Mandrake9.0 lm_sensors install 10.11.02
>>=============================
>>
>>CD1
>>===
>>liblm_sensors1-2.6.4-4mdk.i586.rpm
>>librrdtool0-1.0.38-3mdk.i586.rpm
>>
>>CD2
>>===
>>liblm_sensors1-devel-2.6.4-4mdk.i586.rpm
>>
>>CD3
>>===
>>liblm_sensors1-static-devel-2.6.4-4mdk.i586.rpm
>>
>>CD1
>>===
>>lm_sensors-2.6.4-4mdk.i586.rpm
>>
>>in that order.
>>
>>the result was:-
>>
>>[root@localhost root]# sensors
>>w83627hf-i2c-0-2d
>>Adapter: SMBus Via Pro adapter at 0400
>>Algorithm: Non-I2C SMBus adapter
>>VCore 1: +1.72 V (min = +4.08 V, max = +4.08 V) ALARM
>>VCore 2: +1.24 V (min = +4.08 V, max = +4.08 V) ALARM
>>+3.3V: +3.31 V (min = +2.97 V, max = +3.63 V)
>>+5V: +5.07 V (min = +4.50 V, max = +5.48 V)
>>+12V: +12.31 V (min = +10.79 V, max = +13.11 V)
>>-12V: -12.03 V (min = -13.21 V, max = -10.90 V)
>>-5V: -5.17 V (min = -5.51 V, max = -4.51 V)
>>V5SB: +5.53 V (min = +4.50 V, max = +5.48 V) ALARM
>>VBat: +3.44 V (min = +2.70 V, max = +3.29 V) ALARM
>>fan1: 0 RPM (min = 3000 RPM, div = 2) ALARM
>>fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM
>>fan3: 3792 RPM (min = 3000 RPM, div = 2)
>>temp1: +33�C (limit = +60�C) sensor =
>>thermistor
>>temp2: +44.5�C (limit = +60�C, hysteresis = +50�C) sensor =
>>thermistor
>>temp3: +208.0�C (limit = +60�C, hysteresis = +50�C) sensor =
>>thermistor
>>vid: +1.850 V
>>alarms: Chassis intrusion detection ALARM
>>beep_enable:
>> Sound alarm disabled
>>
>>eeprom-i2c-0-50
>>Adapter: SMBus Via Pro adapter at 0400
>>Algorithm: Non-I2C SMBus adapter
>>Memory type: DDR SDRAM DIMM SPD
>>SDRAM Size (MB): 512
>>
>>which appears to be ok , the temp3 facility must be so dual cpu
>>processors are
>>catered for, and where a single processor is present as in my case it
>>puts some
>>ridiculous value in instead of something like `nothing detected'.
>>
>>
>>John
>>
>>
>
>Hola, John.
>
> Take a look at /usr/share/doc/lm_sensors-2.6.4/doc/chips/w83781d, there you
>will find some useful info about your w83627hf chip.
>
>Suerte.
>
>
Hey Suerte,
I hadn't noticed that, one thing keeps bothering me , I don't actually
understand the term, Hysteresis value , and I haven't found an explanation
as to it's meaning so far , it's obviously something I need to find out
about.
By the way does M9.0 still have a Webster's dictionary like M8.2 had, it
didn't automatically install, and I haven't had time to scan discs to see.
Anyone know ?
I should think it would be worthwhile for Mandrake to incorporate
lm_sensors
into MCC under system , perhaps subcatagory sensors of something.
It's a basic system's function to track system temperatures, voltages,
and rpm's, and would benifit from being part of the base install.
John
Later,
According to my Collin's dictionary Hysteresis is "The tendency of a magnetic substance to remain in a certain magnetic condition"
Which does not precisely explain the current use of the word in
our context.
John
--
John Richard Smith
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
