On Thu, 2002-11-21 at 12:32, John Richard Smith wrote: > Aaron wrote: > > >Hi I am also having a problem but guess I am not so far along as you > >are. > >I have a plextor ide cdr that stopped working so I sent to be repaired. > >I never tried to configure it under MD 9.0 before but I am attempting > >this now. I see in kdes scsi control module that it exist as Host:scsi2 > >channel:00 ld: 02 Lun: 00 whatever that means. > >Whaen I do cdrecord -scanbus I get this > > > >Linux sg driver version: 3.1.24 > >Using libscg version 'schily-0.6' > >scsibus0: > > 0,0,0 0) * > > 0,1,0 1) * > > 0,2,0 2) * > > 0,3,0 3) 'PLEXTOR ' 'CD-ROM PX-40TS ' '1.10' Removable > >CD-ROM > > 0,4,0 4) * > > 0,5,0 5) * > > 0,6,0 6) * > > 0,7,0 7) * > >scsibus2: > > 2,0,0 200) * > > 2,1,0 201) * > > > > 2,2,0 202) 'D �D �' 'D �D �D �D �' 'D �' vendor specific 4 > >unknown device type 0x1c > > 2,3,0 203) * > > 2,4,0 204) * > > 2,5,0 205) * > > 2,6,0 206) * > > 2,7,0 207) * > >I had it setup in fstab before I took the drive out, now the entries are > >no good, and I need to find out what to put in fstab for my cd. > >I have three cds a ide dvd reader, a scsi reader, and an ide cdr. > > > >thanks > >Aaron > > > > > > > > > Gutten Tag Aaron, > > You have 2 devices , a CDROM Ultraplex 40max scsi reader
and a Writer, both on 2nd IDE line (my hitachi dvd??)? I have 2 ide devices a dvd hitachi and the plextor writer > > The Plextor is the writer ?Yes 40/12/40a Plexwriter ide > > are they both IDE devices ? if not which is true scsi device The 40max is true scsi? > > can we see your /etc/fstab entries please/dev/hda7 / ext3 defaults 1 1 /dev/hda5 /boot ext2 defaults 1 2 none /dev/pts devpts mode=0620 0 0 /dev/hda8 /download ext3 defaults 1 2 /dev/hdb /mnt/cdrom auto codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,user,nodev 0 0 /dev/scd1 /mnt/cdrom2 auto codepage=850,iocharset=iso8859-1,noauto,nosuid,rw,user,nodev 0 0 /dev/scd0 /mnt/cdrom3 auto codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,user,nodev 0 0 /dev/fd0 /mnt/floppy auto iocharset=iso8859-1,codepage=850,sync,unhide,noauto,nosuid,user,nodev 0 0 none /proc proc defaults 0 0 /dev/hda1 /windows vfat iocharset=iso8859-1,codepage=850 0 0 /dev/hda6 swap swap defaults 0 0 > > John > > -- > John Richard Smith > [EMAIL PROTECTED] > > Thanks do you need to see /dev/ I could ls >dev.txt if you like??? Thanks so much Aaron > > ---- > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
