Malcolm Candlish wrote:
Dennis,I don't have any problem with both dvd/rom and writer being under scsi-emulation
Thank you for your comments. Have have now seemingly got this right.
However, as stated to Tom, Alex and Richard in this thread, the cost of
getting my XCDRoast to work with the CD reader is to loose it's (the cd
reader) normal usage.
How do you get around this?
Best wishes and with thanks.
Malcolm Candlish.
On Thu, 2002-12-12 at 19:20, Myers, Dennis R NWO wrote:
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Malcolm Candlish
Sent: Thursday, December 12, 2002 12:57 PM
To: Mandrake List
Subject: Re: [newbie] XCDroast primary read device.
Alex,
I had no idea that the reader cdrom which is my hdc should be emulating
a scsi device as does my cdrwrom on hdd.
However, I tried to repeat line 12 but quoting hdc in my /etc/lilo.conf
and in running it claimed 'line 13 unsupported by lilo'. I knocked out
append and other encumbrance's, but still the same response.
May I thank you for your interest and for your kind reply.
Malcolm Candlish.
The file details of my Mandrake 9.0 system are as follows:-
/etc/fstab
/dev/hdb5 / ext3 defaults 1 1
none /dev/pts devpts mode=0620 0 0
/dev/hdb6 /home ext3 defaults 1 2
none /mnt/cdrom supermount
dev=/dev/hdc,fs=auto,ro,--,user,iocharset=iso8859-15,codepage=850,umask=0 0
0
none /mnt/cdrom2 supermount
dev=/dev/scd0,fs=auto,--,user,iocharset=iso8859-15,codepage=850,umask=0
0 0
none /mnt/floppy supermount
dev=/dev/fd0,fs=auto,--,user,iocharset=iso8859-15,sync,codepage=850,umask=0
0 0
/dev/hda1 /mnt/nt ntfs ro,umask=0,iocharset=iso8859-15 0 0
none /proc proc defaults 0 0
/dev/hdb7 swap swap defaults 0 0
/etc/lilo.conf
boot=/dev/hda
vga=normal
default=Mandrake
prompt
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
image=/boot/vmlinuz-2.4.19-16mdk
label=Mandrake
root=/dev/hdb5
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdd=ide-scsi"
read-only
other=/dev/hda1
label=windows
[root@localhost malcolm]# cdrecord -scanbus
Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C)
1995-2002 J�rg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) 'MITSUMI ' 'CR-4804TE ' '2.6C' Removable
CD-ROM
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *scsibus1:
1,0,0 100) *
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) 'SCANNER ' ' '
'V101 ' Scanner
1,7,0 107) *
[root@localhost malcolm]#
On Tue, 2002-12-10 at 21:19, A V Flinsch wrote:
On Tuesday 10 December 2002 02:54 pm, Malcolm Candlish wrote:Malcom, do you mean that you added "hdc=ide-scsi" right after where it says
Hello all,sounds like your reader is not under ide-scsi
Has anyone experienced a problem with XCDROAST on Mandrake 9.0 because
I cannot get it to recognise my CD Reader either Primary or Secondary.
Under CD Writer Config I have Mitsumi CR-4804TE which is correct. But
under CD Reader both Primary & Secondary are given the same Mitsumi
Writer instead of the correct Teac CD Rom.
Are there any XCDRoast files I can manipulate? Has any one else had
this problem?
look in /etc/lilo.conf for a line with hd?=ide-scsi and make sure that both the cdrom and cdwriter are listed, then lilo and reboot.
--
Alex / KC2IVL ft100 software for Linux http://www.qsl.net/kc2ivl
"Good judgment comes from experience, and a lot of that comes from bad judgment"
----
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
"hdd=ide-scsi"?
the added hdc should be seperated with a space and within the " mark. HTH
Dennis M.
and retaining full use of normal read for both devices.
John
--
John Richard Smith
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
