Marc,
Yeap, its a driver issue, its the limited amount of drivers loaded into 9.0
kernel. Hmmmm, did you replace the CDROM with the same model of the CDROM?
Search on Mandrake for errate on your Hardware manufacturers. I thought we
were done with this crap years ago........
On Monday 16 December 2002 06:59 am, Marc wrote:
> 12/13/02 12:18:26 PM, Vasiliy Boulytchev
>
> <[EMAIL PROTECTED]> wrote:
> >Gentlemen, I have had this error in the past, but I believe
>
> with FreeBSD 4.6.
>
> >I do NOT remember what exactly it was that I did. OH
>
> YEAH!!! I think it was
>
> >the CDROM. Believe it or not. Replace the IDE cdrom,
>
> and install will fly
>
> >right through, unbelievable, but im 99 percent sure thats
>
> what i did,
>
> >because Ive swapped a few HDs and it was doing the same
>
> ****. You can at
>
> >least try.....
> >
> >On Friday 13 December 2002 08:31 am, wouter pos wrote:
> >> I had have the same problem HELP US!!!!
> >>
> >> greetings wouter pos
> >>
> >> --- Marc <[EMAIL PROTECTED]> wrote:
> >> > I have a set of 9.0 CDs that I am shure are good
> >> > because
> >> > I have used them to install 9.0 on 2 other machines.
> >> > Last
> >> > night I went to install mandrake on a friends
> >> > machine ,
> >> > things seemed to be going well for the first minite
> >> > or 2 and
> >> > then it hung while on hard drive detection part of
> >> > the
> >> > installation.
> >> > I tried to repeat the installation several times
> >> > useing the
> >> > reccomended and then the expert mode. I even tried
> >> > to use
> >> > Partition Magic to repartiton the hard drive first
> >> > still no luck.
> >> > This machine allready has windoze 98se installed
> >> > on a 60
> >> > GB western digital hard drive, Athlon 1.7XP
> >> > processor and
> >> > 256 MB ram I was useing a cd drive installed on IDE
> >> >
> >> > channel 2 and operating as a slave.
> >> > Could this be the problem ?
> >> > I have never tried to install off a cd that was a
> >> > slave before
> >> > however it seems to me that It should be ok.
> >> > Any one have any Ideas where this installation is
> >> > going
> >> > wrong?
> >> >
> >> > Thanks in advance
> >> > Marc
>
> I tried switching the CD drive to master, no luck Then I
> replaced the CD drive with a new one fresh out of the box
> and still no luck. Tried mandrake 8.2 instead of 9.0 and still
> no luck. I then tried to install 8.1 IT WORKED!!!
> After that I tried to upgrade to 9.0 and back to the same
> old story, the installation hung in the same spot again.
> Anyone have any idea what is going on and how to fix it?
>
> Thanks
> Marc
--
Vasiliy Boulytchev
Colorado Information Technologies Inc.
(719) 473-2800 x15
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
