On Saturday 01 March 2003 02:06 pm, et wrote:
> APM? acpi???? apic? no pentium? in lilo? in bios? as a service?
> agp apature size? cpu /FSB clock speed? memory wait states?
> what does "cat /proc/interrupts" and "cat /proc/pci"
APM is disabled in services. I've tried the no/off acpi and apic options in
/etc/lilo.conf, seem to make no diff. (and yes I reran /sbin/lilo). Agp
aperture size is set to 64 or 128, can't remember which. I've got a 64 meg
Nvidia Ti4200 Geforce card. I'm using the default BIOS settings for the CPU
and front side bus. I believe its 266mhz for the FSB. Again, the default
settings (supposedly safe) are set for memory wait states.
Here are interrupts and pci:
[EMAIL PROTECTED] darklord]$ cat /proc/interrupts
CPU0
0: 418895 XT-PIC timer
1: 3953 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 28929 XT-PIC serial
5: 71101 XT-PIC CMI8738-MC6, nvidia
7: 61 XT-PIC bttv
8: 1 XT-PIC rtc
10: 313 XT-PIC eth0
11: 4609 XT-PIC aic7xxx, usb-uhci, usb-uhci
14: 18664 XT-PIC ide0
NMI: 0
LOC: 418840
ERR: 0
MIS: 0
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8367 [KT266] (rev 0).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 9, function 0:
Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model
NC100 (rev 17).
IRQ 10.
Master Capable. Latency=32. Min Gnt=255.Max Lat=255.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xe3000000 [0xe30003ff].
Bus 0, device 10, function 0:
Multimedia video controller: Brooktree Corporation Bt878 (rev 17).
IRQ 7.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xe3001000 [0xe3001fff].
Bus 0, device 10, function 1:
Multimedia controller: Brooktree Corporation Bt878 (rev 17).
IRQ 7.
Master Capable. Latency=32. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xe3002000 [0xe3002fff].
Bus 0, device 11, function 0:
SCSI storage controller: Adaptec AHA-2930CU (rev 3).
IRQ 11.
Master Capable. Latency=32. Min Gnt=4.Max Lat=4.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xe3003000 [0xe3003fff].
Bus 0, device 14, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16).
IRQ 5.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xd800 [0xd8ff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xdc00 [0xdc0f].
Bus 0, device 17, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 27).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xe000 [0xe01f].
Bus 0, device 17, function 3:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 27).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xe400 [0xe41f].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation GeForce4 Ti 4200 (rev 163).
IRQ 5.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
Prefetchable 32 bit memory at 0xdc000000 [0xdc07ffff].
Well, thats about it. I guess you saw in another reply to this thread that I
figured out what was wrong outside of games - somehow when I installed the
4191 drivers, it broke my screensavers that needed 3D acceleration. So, I
just need to know what to do to re-enable them.
Thanks for all your help! :-)
--
/\
Dark< >Lord
\/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
