> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Adolfo Bello > Sent: donderdag 20 maart 2003 11:34 > To: [EMAIL PROTECTED] > Subject: Re: [newbie] cdwriter > > > On Thu, 2003-03-20 at 01:09, Scott Thayer wrote: > > On Wed, 19 Mar 2003 19:43:19 +0100 > > "Jan Verstuyft" <[EMAIL PROTECTED]> wrote: > > > > > Hello, > > > > > > My cdwriter doesn't do what I asked him to do. > > > > > > Most of the time, he starts writing, and after a 20 Mb, > he stops. > > > And, the funny part is that de leds of capslock and > scrollock starts > > > going on/off all the time. For the rest, my machine crashed. I > > > couldn't do anything any more. > > > > > > The command that I use is > > > > > > cdrecord speed=1 dev=0,3,0 -isosize -data cdimage.raw > > > > > > > > > I also tried it without de isosize flag, but it didn't > work either. > > > > > > I must be honest, it worked one time. But that's it. > > > > > > Can you help me > > > > > > Kind regards > > > > > > Jan Verstuyft > > > > > > > > > > > What output do you get from "cdrecord -scanbus"? > > What messages do you get if you try: > cdrecord -v -dummy speed=1 dev=0,3,0 -isosize -data cdimage.raw >
He gave me this if I tried the command from above. Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg Schillin g TOC Type: 1 = CD-ROM scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.6' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 7200 ' Revision : '3.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET RAW/R16 Drive buf size : 786432 = 768 KB FIFO size : 4194304 = 4096 KB Track 01: data 491 MB Total size: 564 MB (55:58.53) = 251890 sectors Lout start: 565 MB (56:00/40) = 251890 sectors Current Secsize: 2048 ATIP start of lead in: -11769 (97:25/06) ATIP start of lead out: 359775 (79:59/00) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 64 Manufacturer: MPO Blocks total: 359775 Blocks current: 359775 Blocks remaining: 107885 Starting to write CD/DVD at speed 2 in dummy TAO mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 19 of 491 MB written (fifo 100%) [buf 92%] 2.1x. And at this moment, he starts blinking again, like I described above. > BTW, man cdrecord alerts not to use -isosize with iso files > created with mkisofs. > > Have you tried using the -dao option (in case your drive > handles write-at-once), like in: cdrecord -v -dummy -eject > speed=1 dev=0,3,0 -dao cdimage.raw > > > -- > __ > / \\ @ __ __ @ Adolfo Bello > <[EMAIL PROTECTED]> > / // // /\ / \\ // \ // Bello Ingenieria S.A, ICQ: 65910258 > / \\ // / \\ / // // / // celular: +58 416 609-6213 > /___// // / <_/ \__\\ //__/ // fax : +58 212 952-6797 > www.bisapi.com // pager : [EMAIL PROTECTED] > > >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
