On Sat, 2003-03-29 at 12:57, Jozef Riha wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > once i installed 9.1 (over 9.0 installation) and rebooted i get this > error message during the boot-up and on login/logout: > > ldm_validate_partition_table(): Disk read failed > > by booting with the old kernel: 2.4.19-24mdk this message disappears.. > > any suggestions please? > > thx, >
I also upgraded from 9.0 to 9.1 and am having this same problem. I see it two times during bootup: (1) "Finding module dependencies" (2) "Starting CUPS printing system" Do you have a flash card reader? I do, and I'm wondering if that is interfering. This message doesn't appear to be causing problems - printing still works. I researched this a little more, and here is what dmesg says. This further makes me think that the flash card reader is causing this: Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage scsi1 : SCSI emulation for USB Mass Storage devices Vendor: SanDisk Model: ImageMate CF-SM Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 0 sdd : READ CAPACITY failed. sdd : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdd : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:30, sector 0 I/O error: dev 08:30, sector 0 I/O error: dev 08:30, sector 2097144 I/O error: dev 08:30, sector 2097144 I/O error: dev 08:30, sector 0 I/O error: dev 08:30, sector 0 ldm_validate_partition_table(): Disk read failed. I/O error: dev 08:30, sector 0 unable to read partition table WARNING: USB Mass Storage data integrity not assured -- Guy Rouillier <[EMAIL PROTECTED]>
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
