No go--I still get a segmentation fault. Besides which, I _think_ it uses the epkowa.conf file, should it not?
Miark On Wed, 4 Jun 2003 00:36:09 +0200 Francisco Alcaraz <[EMAIL PROTECTED]> wrote: > Sorry!, the line has: > > usb /dev/usb/scanner0 > > > > > El Mi�rcoles 04 Junio 2003 00:33, Francisco Alcaraz escribi�: > > I have iscan 1.5 runing fine under Mandrake 9.1, you just need to make a > > change in a file: > > > > A) As root go to the /etc/sane.d/ directory > > > > B) edit the file epson.conf (for example with mc or kwrite); go to the end > > of the file, uncomment (erase the # symbol) the line that has: > > #usb /dev/usb/scanner0; so it will be: > > usb /dev/usb/scanner0 > > > > > > And that it's all; you will have iscan runing fine. > > > > El Martes 03 Junio 2003 23:56, Miark escribi�: > > > I have the same problem. iscan 1.5 does not work in MDK 9.1, although > > > xsane works fine. It didn't seem to make any difference that the scanner > > > was installed before iscan. The src rpm won't build either. > > > > > > Miark > > > > > > > > > > > > > > > On Tue, 3 Jun 2003 18:37:36 +0100 > > > > > > "<LtCdData>" <[EMAIL PROTECTED]> wrote: > > > > On Tuesday 03 June 2003 18:35, Kristjan wrote: > > > > > Hi > > > > > > > > > > Has anyone using Epson scanner got the Epsons IScan work > > > > > > > > > > I have epson 1260 scanner and it works fine with sane and XSane I > > > > > wanted to get also th epsons version work but seems no matter what I > > > > > edit in the config files IScan still is unable to work. Giving error > > > > > "could not send command to scanner" > > > > > > > > > > I just thought maybe somebody has played with it more and got it > > > > > work. > > > > > > > > > > Kristjan > > > > > > > > ive been using iscan since i got my epson1650, now using version 1.5 > > > > and use it as my first choice for the scanner.. > > > > > > > > did you install iscan before the scanner was setup .. ?? > > > > if you did then rpm -e iscan and reinstall it as it should pick > > > > everything up. ive noticed this in the past that iscan needs to be > > > > installed after the scanner is working > > > > tho this should not be an issue with 9.x mandrake it was with 8.x so > > > > ill add the stuff you need to do with that just inscase > > > > > > > > ****************************************** > > > > First place to check: cat /proc/bus/usb/devices > > > > > > > > For my machine the vendor # is 0x04b8 and the Product # is 0x1001 > > > > > > > > once you've found the Product # you can modprobe: > > > > > > > > modprobe scanner vendor=0x04b8 product=0x0110 > > > > > > > > create the device file in /dev: > > > > > > > > mknod /dev/usbscanner0 c 180 48 > > > > > > > > chmod 666 /dev/usbscanner0 > > > > > > > > then edit your /etc/sane.d or /usr/local/etc/sane.d: > > > > > > > > usb /dev/usbscanner0 > > > > > > > > if there are lib file problems do this link below > > > > > > > > ln -s /usr/lib/libgimp-1.2.so.1 /usr/lib/libgimp-1.2.so.0 > > > > > > > > add scanner vendor=0x04b8 product=0x0110 to /etc/modules > > > > > > > > *********************************************** > > > > > > > > hope this helps > > > > > > > > LtCdData > > -- > Francisco Alcaraz Ariza > Murcia, Espa�a (Spain) > > >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
