Hi,
I have 3 OS on 1 drive /dev/hde
1 = Dos /dev/hde1
2 = Redhat 9.0 /dev/hde5
3 = Mandrake 9.1 /dev/hde7
swap = /dev/hde6
Why /dev/hde and not hda - I use ultra dma ide card
Installed - dos -then -redhat- then -mandrake
Usually Mandrake pickup everything nicely like what is on hde and hdg and
config LILO without problem BUT I have not previously installed a 3rd OS on
same drive. I know how with 2 OS on first and 2 OS on second drive. I am
sure it is possible because I understand that LILO can handle up to 16 OS's
and 2 drives.
Mandrake did config redhat on hde5 but with mandrake image and init - If
redhat is picked on GUI it can not complete the boot.
I do not seem to be able to find info on my sort of setup.
There is a lot NT/linux - windows/linux.
Kindly please I need the part to insert in LILO to boot redhat from GUI boot
startup.
Redhat works fine if I use the bootdisk I made with installation. It so
slow.
All this is experimenting and on a spare drive so if I have to reinstall
everything OK fine - I have the time and thats how I learn.
Thanks
Johan
.
May this be a good day for learning
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
