Hello,
Try...I can't seem to find it in the archives, but it may be that you need to
add multi-lun capability.
enter: echo "scsi add-single-device R C T L">/proc/scsi/scsi
where: R=scsi control number (see /proc/scsi/scsi)
C=channel number (always 0)
T=target number (always 0)
L=lun number (starting from zero, this means you want number 1 to be
added)
check /proc/scsi/scsi
I hope this helps.
-Jim
On Monday 16 June 2003 09:40 pm, Aron Smith wrote:
> On Mon, 2003-06-16 at 05:09, Todd Slater wrote:
> > On Mon, Jun 16, 2003 at 02:08:59AM -0700, Aron Smith wrote:
> > > I Finaly got the USB Flashdrive working in a R/W mode but where my
> > > WinDoze box sees it as 2 32mb drives my Linbox only sees it as one of
> > > the drives any Ideas on how to reformatt the drive as one drive?
> >
> > So I take it the drive *is* 2 32MB drives? If so, a recent post on a USB
> > smart media and compact flash combo reader might help; I got my SanDisk
> > reader to mount both without a hitch. I can dig that out if it's what
> > you might need.
> >
> > Todd
>
> At this point anything would help
> I want to get this worked out before I buy a bigger flashdrive for my
> MiniITX project(Hellachus music player)
>
> > ______________________________________________________________________
> > Want to buy your Pack or Services from MandrakeSoft?
> > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
