Should i direct this question to expert list at linux-mandrake
or what do you recommend trying?

please help!
thanks
baris
----- Original Message -----
From: Baris Hasdemir <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 05, 1999 1:42 PM
Subject: [newbie] ethernet blocks modem device? or what?


>
> hi,
>
> When i install mandrake6.0 skipping the network(not dialup) settings
> kppp clearly sees my modem which is on com2 in windows(modem:us robotics
> 56.6 voice int)
> But when i do not skip and do the network preferences(ethernet card:
realtek
> 8139)
> kppp says "sorry your modem is busy" or something like that...
>
> below lists /proc/ioports and /proc/interrupts
> i hope these will satisfy the need
>
> how can i solve that device conflict? (if it is so)
>
> i tried writing
> linux ether=9,0xd000,eth0
> in LILO BOOT
> but didnt work.
>
> /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0220-022f : soundblaster
> 02f8-02ff : serial(auto)
> 0330-0333 : MPU-401 UART
> 0376-0376 : ide1
> 0388-038b : Yamaha OPL3
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> d000-d07f : eth0
> d800-d807 : ide0
> d808-d80f : ide1
>
> /proc/interrupts
>            CPU0
>   0:      32107          XT-PIC  timer
>   1:        533          XT-PIC  keyboard
>   2:          0          XT-PIC  cascade
>   5:          1          XT-PIC  soundblaster
>   8:          2          XT-PIC  rtc
>   9:        351          XT-PIC  eth0
>  12:       9607          XT-PIC  PS/2 Mouse
>  13:          1          XT-PIC  fpu
>  14:      27436          XT-PIC  ide0
>  15:         11          XT-PIC  ide1
> NMI:          0
>
> and this is what i get when run ifconfig:
>
> eth0      Link encap:Ethernet  HWaddr 00:00:B4:94:08:C8
>           inet addr:10.10.10.1  Bcast:10.255.255.255  Mask:255.0.0.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:549 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:548 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           Interrupt:9 Base address:0xd000
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:3924  Metric:1
>           RX packets:236 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:236 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>
> with my thanks and love,
> baris
>
>
>
>
>

Reply via email to