This is what I thought the original problem could be also, but it wasn't.
Here is what my /etc/conf.modules file looks like:
alias eth0 3c59x
alias parport_lowlevel parport_pc
options parport_pc io=0x378 irq=7
pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
alias sound sb
pre-install sound insmod sound dmabuf=1
options opl3 io=0x388
alias midi awe_wave
post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
Thanks again for any replies
-Bill Munden
----- Original Message -----
From: Mike Fieschko <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 05, 1999 6:50 AM
Subject: [newbie] My printer doesn't work...
> >>> "Bill" == Bill Munden <[EMAIL PROTECTED]> writes:
>
> Bill> I have installed Linux-Mandrake 6.1. When I initially setup
> Bill> my printer, I was able to print some test pages just fine.
> Bill> Afterward, I ran the sndconfig utility for my Sound Blaster
> Bill> Awe 32. Sound works okay, but I am no longer able to print
>
> Looks as if sndconfig grabbed IRQ 7 for the sound card.
>
> Check /etc/conf.modules
>
> You may have to rerun sndconfig and give the sound card a different
> IRQ.
>
> --
> Mike Fieschko, West Orange, NJ, USA
> X-Mailer: XEmacs 21.1, VM 6.71 and random-sig.el
> http://www.viconet.com/fieschko/home.htm
> Oct 5 St Placid and companions
> "Religious liberty might be supposed to mean that everybody is free to
> discuss religion. In practice it means that hardly anybody is allowed
> to mention it." - [G.K. Chesterton, in Autobiography, 1937]
>
