Re: [newbie] cd-rw error

John Richard Smith Thu, 31 Jul 2003 03:09:43 -0700

L.V.Gandhi wrote:

On Tuesday 29 Jul 2003 7:24 pm, K Montgomery wrote:

When I've received errors like this, I have been able to write the CD if I reduce the write speed (from, say, 8x to 4x, for example).

I used even cdrecord -v speed=2 dev=0,0,0 -data /mnt/wind/arch-0.4.iso

Still I get errors Starting to write CD/DVD at speed 4 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 542 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 27 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.007s timeout 40s

write track data: error after 0 bytes

Re: write_g1: scsi sendcmd: no error

------------------------------------------------------------------------

   * From: Joerg Schilling
   * Subject: Re: write_g1: scsi sendcmd: no error
   * Date: Mon, 27 Jan 2003 04:32:51 -0800

------------------------------------------------------------------------

From: =?iso-8859-1?q?R=FCdiger=20Sonderfeld?= <[EMAIL PROTECTED]>

hi,
I'm trying to burn a music CD but cdrecord stops with a
"Input/output error. write_g1: scsi sendcmd: no error"

System: AMD Athlon, 256 MB RAM, Debian Woody Linux stable, Kernel 2.4.18
Media: TDK CD-R XG for audio
Recorder: Plextor 24/10/40 A

uname -a
Linux debian01 2.4.18 #24 Fri Aug 30 13:05:08 CEST 2002 i686 unknown
cdrecord -version
Cdrecord 2.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
cdrecord -v dev=0,1,0 -dummy -audio -pad speed=24 *.wav
[...] Track 08: 1 of 39 MB written (fifo 100%) [buf 59%] 16.3x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 01 6B 19 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.049s timeout 40s

The same question has been asked before....


Kill the unfriendly application that tries to access the drive while cdrecord
is working.

J�rg

and,

Seems like you have two programmes trying to seek the same device and cdrecord is loosing.

John

-- John Richard Smith [EMAIL PROTECTED]

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Re: [newbie] cd-rw error

Reply via email to