On Thursday 31 July 2003 20:32, Grant wrote:
> > > Here's my modules.conf file:
> > >
> > > probeall usb-interface usb-uhci
> > > alias sound-slot-0 snd-0
> > > # lt_drivers: autoloading and insertion parameter usage
> > > alias char-major-62 lt_serial
> > > alias /dev/tts/LT0 lt_serial
> > > alias /dev/modem lt_serial
> > > # The next two lines are syntax examples, only Rarely Needed,
> >
> > to automate parameter usage during lt_drivers insertion. See
> > documentation for details.
> >
> > > # options lt_modem vendor_id=0x115d device_id=0x0420
> > > # options lt_modem Forced=3,0x130,0x2f8,0
> > > # section for lt_drivers ends
> >
> > Well it certainly appears as though the proper stuff is all there
> > for the modem to be working - have you tried to do a:
> >
> > modprobe lt_serial
> >
> > ...to see what happens?
> >
> > So then you're going to make sure you have a link to /dev/modem
> > created if it ain't already - easy enough - just type:
> >
> > ln -s /dev/lt_serial /dev/modem
> >
> > ...that should start you on yer way hometeam!
>
> modprobe lt_serial just says "bad command" and I also noticed there
> is no directory or file at /dev/lt_serial . Do I need to get
> modprobe working? How?
>
> - Grant
You must be root to use modprobe and the modutils rpm must be
installed :)
HTH,
-Frans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
