Oder Santos wrote:
>
> Hi Steve Philp,
> I am really new to linux and appreciate very much your help, but,
> unfortunately, the modem doesn't work. What do you think about - makedev
> ttyS2 irq 10- or - setserial ttyS2 irq 10 - is it possible? Tanks in
> advance. Oder
My mistake, I misread the original message badly.
You'll want to do:
setserial /dev/ttyS2 irq 10
Also, check your system logs to ensure that the PCMCIA card was
recognized and is up and running.
> > Oder Santos wrote:
> > >
> > > What should I do to configure a modem in Mandrake 6.0?
> > > The command dmesg showed only:
> > > Serial driver version 4.27 with Many_Ports...............
> > > ttyS00 at 0x03f8 (irq=4) is a 16550A
> > > In windows my pcmcia is COM 3 IRQ 10. I don't know how to manage
> setserial
> > > to inform that the serial port in a non standard irq.
> > > Any help would be really appreciate. Oder
> >
> > setserial /dev/ttyS0 irq 10
> >
> > If your modem works after that, put that command at the end of
> > /etc/rc.d/rc.local
--
Steve Philp
Network Administrator
Advance Packaging Corporation
[EMAIL PROTECTED]
