List, below I have included cue sheet from a dummy burn of cdrecord from gcombust 0.1.53. I'm trying to burn mdk 9.2 from ISO. I initially burned the first cd successfully? I can read it but am not sure if it is actually bootable.I'll try to get to that later. When I went to burn disk 2 extensions, I started getting the error message I have enclosed in the attachment. I've tried several different cdrs all 80min or 700MB PNY Black Diamonds (16x) and no go.
As for setting up a bootable cd, I googled and found a post or two on using dd if=/mnt/fd0 of=/boot.img bs=18k. That appears ok to me. I'll use a 9.1 boot floppy create the image and wahla. But what about a boot.catalog file. Do I really need one? Where/how would I find/create one? Thanks, Terry
cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnproof' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W1210A' Revision : '1.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1190112 = 1162 KB FIFO size : 4194304 = 4096 KB scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 /usr/bin/cdrecord: Drive needs to reload the media to return to proper status. Track 01: data 651 MB padsize: 30 KB Lout start: 749 MB (74:13/00) = 333825 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12444 (97:16/06) ATIP start of lead out: 359849 (79:59/74) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Trying to clear drive status. Starting to write CD/DVD at speed 4 in dummy SAO mode for single session. /usr/bin/cdrecord: WARNING: Data may not fit on standard 74min disk. BURN-Free is ON. Sending CUE sheet... Writing pregap for track 10 at -150 write track pad data: error after 0 bytes BFree: 1162 K BSize: 1162 K /usr/bin/cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 240s /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s Track 10: 0 of 651 MB written. write track data: error after 0 bytes Writing time: 5.010s Average write speed 889.4x. Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 /usr/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
