On Thu, 25 Mar 2004 09:59 pm, many eyes viewed Russell Butler's words:-
Hello all Since a recent reinstall of ML9.1, there is a 60 second delay before the modem responds to the initial opening of the dialer. I have tried to adjust the sensible things in the modem setup, and after making adjustments it seems to work immediately, but then next time I try to log on I have to wait. Dial-up is bad enough, without a minutes thumb-twiddling before it dials.
Any thoughts, please?
Russell
You may have to tweak your initialisation strings on the modem itself. Bring the dialling speed back a bit from the default in dialling commands, I use 45 and it works here in Oz, might even go faster. Don't overdo it. Use the modem terminal in KPPP............ Oh sorry, is that what you're using? If not, then please disregard.
Charlie
Thanks, Charlie, but it doesn't seem to be a dialling speed problem. If I have the KPPP log window open it shows an OK at the bottom, but waits the 60 seconds before delivering the ATZ to the modem, upon which dialling proceeds normally. The pre-init delay is shown as 30, which I think is 1/100ths of a second, so that should not be problem.
My other problems were cured by deleting my old KPPP setup, but this persists.
Russell
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
