On Saturday 12 June 2004 10:44 pm, David E. Fox wrote:
> If you're using 10.0 (which seems likely) you want to use the ATA device
> for the cdrom, not the scsi device. You'll want to prefix your device
> with ATA: (i.e., cdrecord -dev=ATA:1,0,0).
>
> try cdrecord --scanbus -dev=ATA, see what it reports. It should report
> your manufacturer under 1,0,0.
I am using 10.0 CE and when I tried the above I get:
******************************************
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright
1997 J. Schilling').
scsibus1:
1,0,0 100) 'LITE-ON ' 'DVDRW LDW-451S ' 'GSB4' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
*******************************************
Although it says the drive is on 1,0,0, dvd::rip would only work when I set
the cdrecord device = ATAPI:0,0,0.
Bottom line is it now works. Thanks for your help!
Mike
____________________________________________________
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________
