On Thursday 05 August 2004 09:06 pm, you wrote: > > You really have me confused now Dan :( Attached is my firewall.sh > file from /etc/firestarter. To me it seems to have rules already in > it. I turned iptables back on, checked at grc.com and its all the > same, 21, 23, 80 open, rest closed. I've been trying to figure this > out for as long as I've been running FS. Why won't a scan of my > system show any stealth ports. Below is the output from grc.com: > > > This textual summary may be printed, or marked and copied > for subsequent pasting into any other application: > > --------------------------------------------------------------------- >- > > GRC Port Authority Report created on UTC: 2004-08-06 at 01:04:18 > > Results from scan of ports: 0, 21-23, 25, 79, 80, 110, 113, > 119, 135, 139, 143, 389, 443, 445, > 1002, 1024-1030, 1720, 5000 > > 3 Ports Open > 22 Ports Closed > 1 Ports Stealth > --------------------- > 26 Ports Tested > > Ports found to be OPEN were: 21, 23, 80 > > The port found to be STEALTH was: 0 > > Other than what is listed above, all ports are CLOSED. > > TruStealth: FAILED - NOT all tested ports were STEALTH, > - NO unsolicited packets were received, > - A PING REPLY (ICMP Echo) WAS RECEIVED. > > --------------------------------------------------------------------- Chris, if you have just turned iptables back on did you reboot? it might help, also did you re-run the firestarter wizard? this may also help. All I have ever done was install iptables, then firestarter and reboot, then run the wizard and it was all steath. I have verified this config by stoping firestarter and scanning again to find all closed, but thats all iptables will do by default unless you give it some rules to go by. This is what firestarter is for an easy way to create rules for iptables. As for your open ports it looks like you have maybe installed a ftp server port 21 uses this and apache web server port 80 uses this. And im not sure what port 23 us used for, maybe someone else can help there. and Cris please send you replies back to the list as it might be helpfull to some one else as well.
Regards, Dan Gordon -- Thu Aug 5 22:55:35 EDT 2004 22:55:35 up 2 days, 2:30, 0 users, load average: 0.00, 0.00, 0.00 Where are the calculations that go with a calculated risk?
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
