I hope some one can point me in the right direction. This card uses the TI chipset and is recognized on boot but does not load. From dmesg I collected the following:
PCI: Enabling device 0000:02:00.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:02:00.0 to 64 acx100_probe_pci: WARNING: ACX111 support is highly experimental! Found ACX111-based wireless network card at 0000:02:00.0, irq:10, phymem1:0x10820000, phymem2:0x10800000, mem1:0xcfb0f000, mem1_size:8192, mem2:0xcfb12000, mem2_size:131072. acx100_probe_pci: using ACX111 io resource addresses (size: 54) hw_unavailable = 1 acx_show_card_eeprom_id: EEPROM card ID string check found uninitialised card ID: this is a SpeedStream SS1021 or Gigafast WF721-AEX, no?? reset hw_unavailable++ acx100_reset_mac: enable soft reset... acx100_reset_mac: disable soft reset and go to init mode... ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!) acx100_reset_dev: Failed to upload firmware to the ACX111 acx100_probe_pci: TI acx_pci: MAC initialize failure! acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loading FAILED acx_pci: probe of 0000:02:00.0 failed with error -5 It seems that the drivers are not being loaded but I am at a loss as to what script file calls them or where the drivers are. does anyone see any other problems I need toaddress? Thanks Pat
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
