Ooooops, gave you too much. The command should be: setserial /dev/ttyS3 IRQ 3
autoconfig
Sorry about that
Regards Eero
On Fri, 03 Dec 1999, you wrote:
> There probably is misconfigured serial port, so you better setserial
> (as root, naturally) by command: setserial /dev/ttyS3 IRQ 3 autoconfigure
>
> I had to do the same and things worked fine after that.:)
>
> Regards Eero
>
> On Fri, 03 Dec 1999, you wrote:
> > First, make sure KPPP is set to use /dev/ttyS3. In KPPP, select the option
> > labeled "query modem" to be sure that KPPP is able to talk to your modem.
> > Then try connecting to your ISP again.
> >
> >
> > HTH,
> > Matt
> >
> >
> > >From: "Jan Herbert" <[EMAIL PROTECTED]>
> > >Reply-To: [EMAIL PROTECTED]
> > >To: <[EMAIL PROTECTED]>
> > >Subject: [newbie] setting up a modem
> > >Date: Thu, 2 Dec 1999 17:35:09 -0500
> > >
> > >Hello,
> > >
> > > I just got a NEWCOM ISA 56K Jumper Modem and set it to COM 4 IRQ 3. Is
> > >their anything else I need to do to set my modem up like in the BIOS or
> > >something like that becaue I'm using KPPP and I set up an account and
> > >everytime i hit connect it says initializing modem then it hangs. Any
> > >suggestions?
> > >
> > >Thanks in advance,
> > >Ian Herbert
> > >
> >
> > ______________________________________________________
> > Get Your Private, Free Email at http://www.hotmail.com
