-----Mensagem original-----
De: Dave Bukove <[EMAIL PROTECTED]>
Para: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Data: Quinta-feira, 23 de Dezembro de 1999 13:19
Assunto: [newbie] Adding a SCSI adapter to a running system
>I am trying to add a second SCSI adapter to my mdk6.1 system. I can insmod
or
>modprobe the driver and it works great. What I can't seem to find is where
in
>the init scripts should I put the commands to load the module? I poked
around a
>while in the /etc dir and in /usr/docs but I couldn't seem to find anything
>about it... not that it's not there, I just can't seem to find it.
>
>tia
>----
>Dave Bukove
>[EMAIL PROTECTED]
Hello Dave,
This might not help but, it's in the general area...
My multiple Ethernet cards (at work) are configured in /etc/conf.modules ,
as per Ethernet-HOWTO (and NET3-HOWTO and...) instructions.
Activation-on-start and default-routes were set using 'control panel /
network' in X.
These latter failed to work for a Cyclades router - apparently due to a bug
in RH initscripts version (not Mandrake). I then added ifconfig and route
commands to /etc/rc.d/rc.local script as suggested by those same HOWTOs.
Best of luck!
Antonio C T Rocha
Brasil
