the module for a 905b is 3c59x, give that awhirl. ;)
Sean
Dave wrote:
>
> ...but insmod of course doesn't work when I use 3c90x (3c905 and 3c905b
> don't exist...)
> -dave
>
> -----Original Message-----
> From: Jaguar [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, February 03, 2000 10:11 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [RE: [newbie] DHCP...]
>
> There seems to be confusion about the chipset.
> Since there is both a 3C509, and a 3C905...I suggest pulling the card after
> POWER OFF....and reading the chipset off of the card...to make sure you are
> trying the correct Driver.
> HTH
> Jaguar
>
> "Dave" <[EMAIL PROTECTED]> wrote:
> > yep...I know it's a 3c905B card...
> > and I looked through the documentation again and didn't see anything of
> > help. One thing I'm confused about,however: if it is the IRQ etc., how do
> i
> > change that? (I have win98 too)
> > Thanks
> > Dave
> >
> > -----Original Message-----
> > From: flupke [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, February 03, 2000 5:07 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [newbie] DHCP...
> >
> >
> > there is a task manager called ktop. It seems that it's what you need.
> > About your 3com card : are you sure this is the module you need?
> > Is there anything mentionned about that in your card's documentation?
> >
> > Dave wrote :
> > > insmod 3c509 gives me
> > > ./3c509.o: init_module: Device or resource busy
> > > ....sorry to have so little to go on, but I have no way of figuring out
> > what
> > > tto do next.
> > > (on a side note, is there a taskmanager or ctrl+alt+del equivalent in
> > linux?
> > > I know that there is ps, but anything else (especially if it is
> accesible
> > in
> > > KDE))?
> > > Thanks
> > > Dave
> > >
> > > >>>>>>>>>
> > > have you tried a insmod 3c509 ??
> > > does not look like the mod for the nic is loaded (hence the no eth0 in
> > > ifconfig)
> > > after you try the insmod (and get no errors ) try a modprobe 3c509
> > > and then a ifconfig if you then see a eth0 ... BINGO
> > > you can go into linuxconf and edit eth0 to use the 3c509 modual and dhcp
> > > protocol.
> > > after you save and exit linuxconf try ifconfig again you should see
> eth0,
> > > if no do a ifup eth0
> > >
> > > Regards,
> > > ROn
>
> ____________________________________________________________________
> Get your own FREE, personal Netscape WebMail account today at
> http://webmail.netscape.com.
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
